Linear Way L

Four-point contact structure
3
High accuracy with simple structure
The simple two-row raceway design minimizes the
number of potential errors in manufacturing and
measurement, and high dimensional accuracy of
raceways can be obtained.
Interchangeable specification products can be
manufactured benefiting from this feature by
rigorous control of the dimensional accuracy of
individual slide units and track rails.
Track rail
Slide unit
Measurement of raceway accuracy
4
Smooth operation and low noise
Smooth and quiet operation is achieved, because all raceway contours are precisely ground and the ball
re-circulating routes are designed based on the analysis of optimal functional characteristics.
5
Accurate and simple installation
Accurate parallel mounting of two track rails can
be made by aligning the attendant rail to the
datum rail. Because the rigidity in the lateral
direction is high, frictional resistance of poorly
aligned two rails will steeply increase giving a
warning so that misalignment can be easily
detected and corrected. Potential troubles due to
misalignment during actual operation such as
short life, degradation in guide accuracy can
therefore be eliminated in advance.
It is easy to butt-joint track rails to form longer
lengths.
1N=0.102kgf=0.2248lbs.
1mm=0.03937inch
55