Linear Way L

Table 11.2 Standard and maximum lengths of stainless steel track rails
n (Number of mounting holes)
E
F
L
E
unit : mm
Item
Model numbe
LWE15 … SL LWE20 … SL LWE25 … SL LWE30 … SL
Standard length Ln
160( 3) 220( 4) 220( 4) 280( 4)
220( 4) 280( 5) 280( 5) 440( 6)
280( 5) 340( 6) 340( 6) 600( 8)
340( 6) 460( 8) 460( 8) 760(10)
460( 8) 640(11) 640(11) 1 000(13)
640(11) 820(14) 820(14)
820(14) 1 000(17) 1 000(17)
Pitch of mounting holes F
E ( 1 )
Standard range
of E ( 2 )
Maximum length ( 3 )( 4 )
incl.
under
60 60 60 80
20 20 20 20
6 8 9 9
36 38 39 49
1 200 1 200 1 200 1 200
(1 600) (1 960) (1 960) (1 960)
Note( 1 ) : When specifying a butt-jointing interchangeable track rail (supplemental code "/ T"), pay attention to the E dimension at the buttjointing
part.
( 2 ) : Not applicable to the track rail with female threads for bellows (supplemental code "/J").
( 3 ) : The E dimension for the rail with the maximum length is 1/2 of the F dimension.
( 4 ) : Track rails with the maximum lengths shown in parentheses can also be manufactured. Consult for further information.
Remark : The above table shows representative model numbers but is applicable to all models of the same size.
180