Parameter setting - Knick

More documents

Recommendations

Info

Sodium hydroxide solution NaOH c[% by wt] Table salt solution NaCl c[% by wt] 48 CONDI 3400(X)-051
Concentration chart (add. function) Select menu: Parameter setting/System control/Concentration chart Specifying a concentration solution for conductivity measurement Concentration chart (additional function SW 3400-009) To specify the customer-specific solution, 5 concentration values A-E are entered in a matrix together with 5 temperature values 1-5. To do so, first enter the 5 temperature values, then enter the respective conductivity values for each concentration A-E. These solutions will then be available in addition to the permanently stored standard solutions (select “Chart”). Menu Display Enter concentration chart 0.020 mS/cm 25.6 °C System control (Administrator) Calculation Blocks Point of measurement Release of options Logbook Concentration chart Factory setting Return 0.020 mS/cm 25.6 °C Concentration table (Administrator) Temp 1 Temp 2 Temp 3 Temp 4 Temp 5 +000.0 °C +005.0 °C +010.0 °C +015.0 °C +020.0 °C Enter values • Call up parameter setting • System control • Select “Concentration chart” Enter 5 temperature values (right/left arrow keys to select position, up/down arrow keys to edit number, confirm with enter.) Abort OK 0.020 mS/cm 25.6 °C Concentration table (Administrator) Concentration A: 1. Cond at +000.0 °C 2. Cond at +005.0 °C 3. Cond at +010.0 °C 4. Cond at +015.0 °C 5. Cond at +020.0 °C Abort 05.00 % by wt 0.000 µS/cm 0.000 µS/cm 0.000 µS/cm 0.000 µS/cm 0.000 µS/cm OK Enter values for concentrations A-E for the respective temperatures. The table values must be continuous. Maxima/minima are not permitted. Incorrect entries are marked with x. The concentration chart is selected as follows: Parameter setting/Module CONDI/Cal preset values/Automatic/Chart. 49
Page 1 and 2: Measuring Module Protos ® CONDI 34
Page 4 and 5: Contents Warranty .................
Page 6: Contents Diagnostics functions . .
Page 9 and 10: Safety information Caution! Never t
Page 11 and 12: Modular concept and instruction man
Page 13 and 14: Short description: Menu structure B
Page 15 and 16: Short description: BASE module Prot
Page 17 and 18: Terminal plate CONDI 3400(X)-051 Te
Page 19 and 20: SE 655 / SE 656 sensor Dimension dr
Page 21 and 22: Wiring example SE 655 / SE 656 sens
Page 23 and 24: Passcode entry Enter passcode: Sele
Page 25 and 26: Menu Display Configure measurement
Page 27 and 28: Menu Display Select favorites 0.245
Page 29 and 30: Calibration / adjustment Temperatur
Page 31 and 32: Menu Display Select calibration met
Page 33 and 34: Menu Display Automatic calibration
Page 35 and 36: Menu Display Manual entry of cal so
Page 37 and 38: Menu Display Product calibration Mo
Page 39 and 40: Calibration / adjustment Zero corre
Page 41 and 42: Parameter setting: Operating levels
Page 43 and 44: Parameter setting Call up parameter
Page 45 and 46: Parameter setting TC process medium
Page 47: Nitric acid HNO 3 c[% by wt] Hydroc
Page 51 and 52: Setting the message parameters Mess
Page 53 and 54: Current outputs, contacts, OK input
Page 55 and 56: • Function characteristic Nonline
Page 57 and 58: NAMUR signals: Current outputs Beha
Page 59 and 60: Relay contacts: Protective wiring P
Page 61 and 62: Limit value, hysteresis, contact ty
Page 63 and 64: Switching parameter sets via OK2 Pa
Page 65 and 66: Activating Calculation Blocks Selec
Page 67 and 68: Setting diagnostics messages as fav
Page 69 and 70: Diagnostics Module diagnostics, sen
Page 71 and 72: Specifications l ------------------
Page 73 and 74: Annex: Minimum measuring spans for
Page 75 and 76: Parameter setting menu Display sett
Page 77 and 78: Calibration menu CONDI 3400(X)-051
Page 79 and 80: Index E EC Declaration of Conformit
Page 81 and 82: Index Parameter tables (Excel) 16 P
Page 83 and 84: Icon Explanation of icons important

Parameter setting - Knick

Create successful ePaper yourself

Delete template?

Save as template?