Parameter setting - Knick
Parameter setting - Knick
Parameter setting - Knick
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Activating Calculation Blocks<br />
Select menu: <strong>Parameter</strong> <strong>setting</strong>/System control/Calculation Blocks<br />
Combining measuring modules to Calculation Blocks<br />
Combining measuring modules<br />
With three measuring modules the following Calculation Block combinations<br />
are possible: I + II , I + III , II + III<br />
Two Calculation Blocks can be activated.<br />
Menu Display Activating Calculation Blocks<br />
40.00 µS/cm<br />
25.6 °C<br />
System control (Administrator)<br />
Calculation Blocks<br />
Point of measurement<br />
Release of options<br />
Logbook<br />
Concentration chart<br />
Factory <strong>setting</strong><br />
Return<br />
40.00 µS/cm<br />
25.6 °C<br />
Calculation Blocks (Administrator)<br />
Block 1<br />
Block 2<br />
Off<br />
Calc Cond/Cond<br />
Calculation Blocks<br />
• Call up parameter <strong>setting</strong><br />
• System control<br />
• Select “Calculation Blocks”<br />
• Depending on modules installed,<br />
the possible combinations<br />
for Calculation Blocks<br />
are offered<br />
Return<br />
40.00 µS/cm<br />
25.6 °C<br />
<strong>Parameter</strong> <strong>setting</strong> (Administrator)<br />
System control<br />
Module FRONT 3400-011<br />
Module BASE 3400-021<br />
Module CONDI 3400-051<br />
Module CONDI 3400-051<br />
+ Calc Cond/Cond<br />
Return<br />
During parameter <strong>setting</strong> the<br />
Calculation Blocks are displayed like<br />
modules.<br />
65
Change language