COMNET III
COMNET III
COMNET III
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 12. Global Setup Commands<br />
12.4 Setup Delay Report<br />
GLOBAL SETUP COMMANDS: SETUP DELAY<br />
REPLICATION 1 FROM 0.0 TO 300.0 SECONDS<br />
ORIGIN / SETUP CMD: SESSIONS SETUP DELAY (MILLISECONDS)<br />
DESTINATION LIST SETUP AVERAGE STD DEV MAXIMUM<br />
______________________ _________ ____________ ____________ ____________<br />
Application Workstation / src Application Request:<br />
cmd Global Setup:<br />
Application Server 16 7.362 MS 4.383 MS 11.923 MS<br />
The Setup Delay Report presents summary statistics for global setup commands on the time<br />
required to set up a session between an originating node and a destination node. The number<br />
of sessions that were set up during the simulation along with delay statistics are reported.<br />
Setup Delay is the time difference between creating the session setup packet and receiving<br />
back the session connect packet.<br />
Sessions Setup<br />
The number of sessions set up. When a session is started by a setup<br />
command, a session setup packet is sent to the destination and a session<br />
connect packet is returned. The session is then counted as set up.<br />
Setup Delay (milliseconds)—Average, Standard Deviation, Maximum<br />
The average, maximum and standard deviation of the observed setup<br />
delay.<br />
179
Change language