User Manual - US Cellular

VPN
Set up and manage Virtual Private Networks (VPNs). For more
information about using VPNs, see “VPN” on page 126
Adding a VPN
1. From the Settings screen, touch Wireless and network
➔ More... ➔ VPN.
You are prompted to set a screen unlock pattern, PIN,
or password.
2. In the Attention pop-up, touch OK. The Screen unlock
settings menu appears. (For instructions on selecting
Screen unlock settings, see “Security” on page 183.)
3. Touch Add VPN network to set up a connection to a
VPN, using the following settings:
•Name: Enter a name for the VPN connection.
•Type: Choose the type of VPN.
• Server address: Enter the IP address of the VPN server.
• PPP encryption (MPPE): Touch to enable or disable
encryption.
• Show advanced options: Touch to show more options.
Available options depend on the type of VPN you are adding.
Note: You must enable at least Pattern security before setting
up a VPN. If you have not yet enabled security, you’ll be
prompted to do so the first time you launch VPN
settings.
Settings 159