2635 manual - BK Precision

Now follow the steps as indicated on the screen. The procedure
will differ according to the set-up of the test system.
Values indicated in field Peak, Qpeak, Average, and Sweep have
no influence on the measurement procedure itself, but are used
for a proper display of the results on the screen. The measurement
itself is performed according to the test settings.
Repeatedly after every fifty steps the graphic display will be
refreshed or, in sweep mode, after terminating the sweep.
At any time a scan can be stopped by a mouse click on the button
Stop. There is no way to continue the scan after it has been
stopped. Nevertheless it is possible to load, visualize, and print
the measurement results at any time, if desired.
Subject to change without notice
55