User Guide - Virgin Media

More documents

Recommendations

Info

Connections 26 When the device is in the Offline profile, you can still use wireless LAN (if available). Remember to comply with any applicable safety requirements when establishing and using a wireless LAN connection. Tip! To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode. WLAN wizard The WLAN wizard helps you to connect to a wireless LAN and manage your wireless LAN connections. The WLAN wizard shows the status of your wireless LAN connections in the active standby mode. To view the available options, scroll to the row showing the status, and press . If the search results of found wireless LANs, for example, WLAN network found are displayed, to create an internet access point and start the web browser using this IAP, select the status, the option Start web browsing, and the network. If you select a secured wireless LAN network, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct network name (service set identifier, SSID). If you are connected to a wireless LAN, the internet access point name and [08]' connected are displayed. To start the web browser using this IAP, select the status and the option Cont. Web browsing. To end the connection in the wireless LAN, select the status and the option Disconnect WLAN. If wireless LAN scanning is off and you are not connected to any wireless LAN, WLAN scanning off is displayed. To set scanning on and search for available wireless LANs, select the status WLAN scanning off. To start a search for available wireless LANs, select a status and the option Search for WLAN. To set wireless LAN scanning off, select a status and the option Switch WLAN scan off. To access the WLAN wizard in the menu, press , and select Tools > WLAN wiz. Wireless LAN access points To search for wireless LANs available within range, press , and select Tools > WLAN wiz.. To create an internet access point in a wireless LAN, select Options > Define access point. To view the details of a network shown in the list, select Options > Details. When an application asks you to select an access point, select the created access point. You can also create an internet access point by selecting Search for WLAN.
You can also use Conn. mgr. to create internet access points. See ‘Wireless LAN’, p. 27. Operating modes There are two operating modes in wireless LAN: infrastructure and ad hoc. The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a wireless LAN access point device, or wireless devices are connected to a wired LAN through a wireless LAN access point device. In the ad hoc operating mode, devices can send and receive data directly with each other. To create an internet access point for an ad hoc network, see ‘Access points’, p. 122. Connection manager Data connections Press , and select Tools > Conn. mgr. > Active data connections. In the active connections view, you can see the open data connections: data calls ( ), packet data connections ( or ), and wireless LAN connections ( ). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all. To view the details of a connection, select Options > Details. The details shown depend on the connection type. Wireless LAN To search for wireless LANs available within range, press , and select Tools > Conn. mgr. > Available WLAN networks. The available wireless LAN view shows a list of wireless LANs within range, their network mode (Infrastructure or Ad-hoc), and signal strength indicator. is shown for networks with encryption, and if your device has an active connection in the network. To view the details of a network, select Options > Details. To create an internet access point in a network, select Options > Define access point. Connections 27
Page 1 and 2: Nokia N95-1
Page 3 and 4: functionality of the applications,
Page 5 and 6: Adobe Flash Player ................
Page 7 and 8: For your safety Read these simple g
Page 9 and 10: assume liability for them. If you c
Page 11 and 12: Your Nokia N95 Software updates Nok
Page 13 and 14: Essential indicators The device is
Page 15 and 16: To scroll in the multimedia menu, u
Page 17 and 18: 4 Push the hinge back in, and close
Page 19 and 20: Web browser Press , and select Web
Page 21 and 22: To open links and make selections,
Page 23 and 24: Page overview When you are browsing
Page 25: Connections Wireless LAN Your devic
Page 29 and 30: Shown to all. To set a time after w
Page 31 and 32: set the other device as authorized.
Page 33 and 34: Device manager To connect to a serv
Page 35 and 36: To repeat the current song ( ), all
Page 37 and 38: • A compatible version of Windows
Page 39 and 40: To listen to the radio using the lo
Page 41 and 42: 1 In Video centre, select the Inter
Page 43 and 44: RealPlayer settings You may receive
Page 45 and 46: You must first create an account wi
Page 47 and 48: halfway down again. You can, howeve
Page 49 and 50: • To return to the viewfinder to
Page 51 and 52: In the active toolbar, select from
Page 53 and 54: 5 The device memory ( ) and memory
Page 55 and 56: Gallery To store and organize your
Page 57 and 58: options vary depending on the view
Page 59 and 60: area, select Back. The selected are
Page 61 and 62: See ‘Send data using Bluetooth co
Page 63 and 64: Image print To print images with Im
Page 65 and 66: To create a new custom muvee by usi
Page 67 and 68: Keep any passcodes secret and in a
Page 69 and 70: 5 Select the device in which the fi
Page 71 and 72: About satellite signals If your dev
Page 73 and 74: To adjust the network, routing, and
Page 75 and 76: Landmarks Press , and select Tools
Page 77 and 78:
Personalize your device To personal
Page 79 and 80:
Doppler effect—Select On to have
Page 81 and 82:
Time management Clock Press , and s
Page 83 and 84:
Messaging Press , and select Messag
Page 85 and 86:
3 In the Subject field, enter the s
Page 87 and 88:
If you select Mailbox in the Messag
Page 89 and 90:
Some or all message centers or acce
Page 91 and 92:
Security (ports)—Select the secur
Page 93 and 94:
Make calls Voice calls 1 In the sta
Page 95 and 96:
to the key to which you want to ass
Page 97 and 98:
To use the main camera for sending
Page 99 and 100:
To save the live video you shared,
Page 101 and 102:
Monitor all communication events Ic
Page 103 and 104:
To delete a contact card in Contact
Page 105 and 106:
Office Quickoffice With Quickoffice
Page 107 and 108:
To open documents, press , and sele
Page 109 and 110:
indicated by icons on the top of th
Page 111 and 112:
• The .jar file is required for i
Page 113 and 114:
Some activation keys may be connect
Page 115 and 116:
Standby mode Active standby—Use s
Page 117 and 118:
Tip! To lock or unlock the keypad m
Page 119 and 120:
• Symbian installation: Yes—The
Page 121 and 122:
Select the desired barring option,
Page 123 and 124:
User name—The user name may be ne
Page 125 and 126:
Access point—The access point nam
Page 127 and 128:
this does not help, restart your co
Page 129 and 130:
Battery information Charging and di
Page 131 and 132:
You should receive a message indica
Page 133 and 134:
Additional safety information Small
Page 135 and 136:
To make an emergency call: 1If the
Page 137 and 138:
inserting pictures 102 sending 102
Page 139 and 140:
PIN codes 117 positioning 70 power
show all

User Guide - Virgin Media

Create successful ePaper yourself

Delete template?

Save as template?