T A B L E O F C O N T E N T S - Panasonic Electric Works Europe AG
T A B L E O F C O N T E N T S - Panasonic Electric Works Europe AG
T A B L E O F C O N T E N T S - Panasonic Electric Works Europe AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WD2/WD3<br />
2. Rocker switch<br />
3.2<br />
4<br />
29 ±0.2<br />
26<br />
19.6<br />
Turn angle:<br />
28°<br />
2-M2.5 screw<br />
4-3.5 dia. hole<br />
1-pole 1-pole (coupled) 2-pole<br />
10.5<br />
8.8<br />
19.4<br />
8.8<br />
19.4<br />
8.8<br />
3.5<br />
35<br />
15.5<br />
6<br />
3-2.4 dia. hole 4-2.4 dia. hole<br />
5<br />
5<br />
6-2.4 dia. hole<br />
5<br />
Remarks: 1. ON-OFF type does not have a terminal No.2 in the middle.<br />
2. ON-OFF type has an ON-OFF display on the handle.<br />
3. M2.5 screws for Philips screwdriver used for installation.<br />
MOUNTING DIMENSIONS<br />
Type 1-pole and 2-pole 1-pole (coupled)<br />
Panel cutout (mm)<br />
3 dia.<br />
9.5 +0.4<br />
20.5 +0.4<br />
29 +0.3 3 dia.<br />
19 +0.4<br />
20.5 +0.4<br />
29 +0.3<br />
Panel thickness<br />
Tumbler switch: Max. 2.5 mm, Rocker switch: Max. 3.2 mm<br />
ELECTRICAL CIRCUIT DI<strong>AG</strong>RAM<br />
1-pole 2-pole 1-pole (coupled)<br />
ON–OFF<br />
ON–ON<br />
Remarks: 1. The numbers on the electrical circuit diagrams indicate terminal numbers.<br />
2. The filled bars indicate mechanical coupling by the handle action and that each pole is operating simultaneously.<br />
NOTES<br />
Soldering<br />
When using solder to wire this switch, be<br />
careful not to allow solder or flux to enter<br />
the inside of the switch from the small<br />
openings around the terminals as this<br />
can lead to faulty contacting. Bear this in<br />
mind, in particular, for the terminal No.2<br />
on the double throw type.<br />
122<br />
05/2009
Change language