T A B L E O F C O N T E N T S - Panasonic Electric Works Europe AG

AJ9 (J9)
SPECIFICATIONS
1. Contact rating
Type
Voltage
Resistive load
(cos φ ] 1.0)
Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.
Motor load
(EN61058-1)
(cos φ ] 0.6)
AJ9 switch 250V AC 16A 4A
2. Characteristics
Expected life
Mechanical
Min. 5 × 10 4 (at 20 cpm.)
(Min. operations)
Electrical
Min. 10 4 (at 10 cpm., at rated load)
Initial insulation resistance (Between terminals)
Min. 100 MΩ (at 500V DC measured by insulation resistive meter)
Initial breakdown voltage (Between terminals)
2,000 Vrms detection current: 10 mA
Initial contact resistance (By voltage drop at 1A, 2 to 4V DC) Max. 20mΩ
Temperature rise
at 6 × 10 3 ope. or less
Max. 30°C (UL1054)
from 6 × 10 3 ope. to 10 4 Max. 55°C (EN61058-1)
Vibration resistance
10 to 55 Hz at double amplitude of 1.5mm
Shock resistance Min. 294m/s 2 {30 G}
Actuator strength
40 N {4.08kgf} for 1 minute (operating direction)
Tensile terminal strength
100 N {10.2kgf} for 1 minute or more (Pull & push direction)
Ambient temperature
–25°C to +85°C (Not freezing below 0°C)
Flame retardancy
UL94V-0
Tracking resistance Min. 175
Operating force
1-pole
3.92 ± 1.96N {400 ±200gf}
(reference characteristics) 2-pole
5.88 ± 24.5N {600 ±250gf}
Contact material
AgZnO alloy
Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571.
DIMENSIONS
mm General tolerance: ±0.5
1) .250 Quick-connect terminal
1. Snap-in mounting type
Diagram of recommended locations
for panel mounting holes
X
28°±4°
37
2-pole
15
10
1-pole
R0.5 Max.
12.6 +0.1
0
O N
O N
2
27 7
Panel thickness
X
0.75 to 1.25 34.2
1.25 to 2 34.4
+0.1
−0
+0.1
−0
9.7
4.4
37
0.8
1.75 dia.
34
6.35
11
1.2
7
12.5
Remark: For soldering compatible with .250 Quick-connect terminal and PC board terminal, only terminal shape is changed.
150
05/2009