educational materials - SPECTRUM Nasco Shopping Mall Divisions

Safe and Durable!
Lab Supplies
General
1.
1. Economy Wash Bottles — Nalgene ®
The bottles and tubing are made of low-density polyethylene and the screw clo-
sures and stems are made of polypropylene. Through-the-top wash bottle with
closure and stem molded in one piece for leakproof service. The tubing is flexible
enough to angle the stream where needed. Tips dispense uniform stream and
can be cut back to increase the flow.
Bottle
Cat. No. Capacity Material Qty./Pkg. Sh. wt. Price
SB08232M 125 ml LDPE 6 0.17 kgs. $22.85
SA08820M 250 ml LDPE 6 0.29 kgs. $26.15
SB08233M 500 ml LDPE 6 0.34 kgs. $30.90
Safe Test Tubes
Large, clear plastic test tubes are basically indestructible
no matter what the age of your scientist.
Threaded cap prevents spills. Will withstand
freezing temperatures or temperatures up to
200° F (will not withstand heat from a flame).
Can be washed over and over. Set of 15 tubes
and caps with activity guide. Sh. wt. 0.85 kgs.
SB33231M — $23.30
Super Tube Rack. Sturdy plastic test tube
holder will hold up to five Unbreakable Super
Tubes . Sh. wt. 0.44 lbs.
SB45376M — $11.85
2. Polyethylene Dispensing Bottles
Bottles have dispenser tops and sealer caps. Seal for
shipment and reseal after using. Sealer snaps on easily.
Standard opening .030" (.76 mm).
2.
Price 12+
Cat. No. Capacity Sh. wt. Each Each
S08279M 60 ml/2 oz. 0.09 kgs. $1.40 $1.36
S08280M 185 ml/6 oz. 0.09 kgs. $4.30 $4.17
SB08094M 500 ml/16 oz. 0.09 kgs. $2.05 $1.99
3.
4.
5.
Media Storage Bottles
Ideal for culture media, chemicals, or solvents. These type 1
borosilicate glass, general purpose media bottles are autoclavable
with permanent white imprinted graduations and
marking spots. The screw thread opening has an ID of approximately
30 mm. The supplied cap is linerless and both the cap
and drip free ring are polypropylene autoclavable to 284° F
(140° C). Sets of 10.
250 ml. Sh. wt. 2.75 kgs. 500 ml. Sh. wt. 3.94 kgs.
SB40878M — $84.80 SB40879M — $90.40
Precisionwave ® wide-mouth HDPE Bottles
Unbreakable, wide-mouth polyethylene jars ideal for storing
solid chemicals and specimens. Screw caps. Supplied
complete with leakproof Bakelite screw caps. Set of 12.
Cat. No. Capacity Closure Size Qty./Pkg. Sh. wt. Price
SB41006M 4 oz. 38 mm 12 1.50 kgs. $13.05
SB41007M 8 oz. 48 mm 12 2.98 kgs. $18.15
SB41008M 16 oz. 53 mm 12 5.96 kgs. $22.00
SB41009M 32 oz. 53 mm 12 11.54 kgs. $32.75
3. Clear Dropping Bottle
Clear glass dropping bottle with rubber bulb and pipette. 1 oz. Sh. wt. 0.63 kgs.
SB13997M — $17.70 per doz.
4. Polyethylene Dropping Bottles
Polyethylene dropper bottles with dispenser caps. Designed for dispensing indicator
solutions, dyes, etc. Hinged caps.
Price 12 or More,
Cat. No. Capacity Sh. wt. Each Each
SB23625M 4 oz. 0.06 kgs. $2.75 $2.67
SB23626M 8 oz. 0.11 kgs. $2.00 $1.94
SB23627M 16 oz. 0.17 kgs. $2.70 $2.62
5. Amber Dropping Bottle
Amber-coloured glass dropping bottle with rubber bulb and pipette. 1-oz. capacity.
Pkg. of 12. Sh. wt. 1.94 lbs.
SB13996M — $16.40
Reagent Bottle, Narrow Mouth
— with Colour-Coded PTFE Flathead Stopper
Bottles conform to ASTM E438, Type I, Class A glass. Bottle necks
are ground to accept flathead colour-coded PTFE stoppers. 100
ml capacity. Sh. wt. 0.20 kgs.
SB28808M — $30.35 ea.
12 or more — $29.44 ea
48 or more — $28.83 ea.
SB48533M
SB48532M
Weighing Bottles
Round, clear glass jars
with stoppers.
10-ml Bottle. 25 x 40 mm. Sh. wt. 0.25 lbs.
SB48533M— $2.35
20-ml Bottle. 30 x 50 mm. Sh. wt. 0.38 lbs.
SB48532M — $2.70
www.education.spectrum-nasco.ca
Barnes Dropping Bottle — Glass
30 ml with rubber bulb forming tight stopper. Sh. wt. 0.14 kgs.
SB01827M — $1.80 ea.
12 or more — $1.75 ea.
48 or more — $1.71 ea.
Replacement Stopper, Pipette, and Bulb Only.
Fits SB01827M. Sh. wt. 0.17 kgs.
SB14004M — $6.85 per doz.
267