SX25 Series Process Controller - Spirax Sarco
SX25 Series Process Controller - Spirax Sarco
SX25 Series Process Controller - Spirax Sarco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.3 Parameter setting<br />
5.3.1 Numeric entry<br />
(i.e. the modification of the<br />
Setpoint value from 275.0 to 240.0 )<br />
Press or momentarily to<br />
change the value of 1 unit every push.<br />
Continued pressing of or<br />
changes the value, at a rate that<br />
doubles every second. Releasing the<br />
button causes the rate of change to<br />
decrease.<br />
In any case the change of the value<br />
stops when it has reached the<br />
max/ min limit set for the parameter.<br />
Operator<br />
mode<br />
working Setpoint<br />
displayed<br />
Local<br />
Setpoint display<br />
Lower<br />
—Lower Setpoint<br />
modification<br />
Raise<br />
In case of Setpoint modification:<br />
press or once to display<br />
the local Setpoint instead of<br />
working Setpoint.<br />
To confirm this change the display<br />
flashes once. Then the Setpoint<br />
can be modified<br />
after 2 sec.<br />
Setpoint entry.<br />
The operation is<br />
acknowledged by<br />
after 2 sec.<br />
one flash of the<br />
display.<br />
IM-P323-25 CH Issue 3 23
Change language