SX25 Series Process Controller - Spirax Sarco

More documents

Recommendations

Info

5.3.2 Mnemonic codes setting (e.g. configuration see page 36) Press the or to display the next or previous mnemonic for the selected parameter. Continued pressing of or will display further mnemonics at a rate of one mnemonic every 0.5 sec. Engineering Units Degree Centigrade Degree Fahrenheit Degree Fahrenheit no units defined Degree Centigrade Ph 24 IM-P323-25 CH Issue 3
5.3.3 Keypad lock To lock/unlock the keypad press the keys and simultaneously for 2 seconds. To confirm the keypad lock/unlock the display flashes once. 5.3.4 Outputs lock 5.3.5 Auto / Man The outputs are switched to the Operator OFF status by pressing the keys mode and together. When the outputs are locked, the message Off is displayed instead of the Setpoint value. To unlock the outputs press both keys simultaneously (the Soft-start will be enabled). Select N¢n to switch to manual mode The keypad lock is remembered during power failure. operator mode Press simultaneously for 2 seconds The outputs lock/ unlock is remembered during power failure. Select Avto to switch to automatic mode • Press to confirm. Back to operator mode. • The led shows the manual mode status. • When manual mode is active, the Setpoint display shows the output value, that can be modified by IM-P323-25 CH Issue 3 25
Page 1 and 2: 3231450/3 IM-P323-25 CH Issue 3 SX2
Page 3 and 4: General Index 1. Safety Information
Page 5 and 6: viii) A disconnecting device (switc
Page 7 and 8: 2.2 Dimensional details 2.3 Panel c
Page 9 and 10: 2.5 Panel mounting 2.5.1 Insert the
Page 11 and 12: 3.2 Precautions and advised conduct
Page 13 and 14: 3.3.2 PV control unit D For mA, mV
Page 15 and 16: SX25 mA Output combination 3.3.5 -
Page 17 and 18: 3.3.5 - L Double Action Logic/ Rela
Page 19 and 20: 4.1 Configuration coding The config
Page 21 and 22: 5.1 Keys and display overview 5 Ope
Page 23: 5.3 Parameter setting 5.3.1 Numeric
Page 27 and 28: P 33 PpAss Password entry only if C
Page 29 and 30: pass Password entry only if Code va
Page 31 and 32: OC Overshoot control (Automatically
Page 33 and 34: Second group tf ¡l Input filter ti
Page 35 and 36: Analogue control output OP4 r£tr A
Page 37 and 38: Password entry only if Cod£ value
Page 39 and 40: 6 Commissioning Examples When the c
Page 41 and 42: First group parameters Press the sc
Page 43 and 44: 6.2 Example of temperature control
Page 45 and 46: Second group parameters The display
Page 47 and 48: The self-learning Adaptive Tuning i
Page 49 and 50: Features (at 25°C environmental te
Page 51: Features (at 25°C environmental te

SX25 Series Process Controller - Spirax Sarco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?