RSView Supervisory Edition Installation Guide

• attaching to an existing HMI server without copying it.
To add an HMI server:
1. In the Application Explorer, right-click the application root, or
right-click an area name, and then click New HMI Server.
2. In the Select Operations window of the Add HMI Server wizard,
click one of the operations to select it, and then click Next. For
details about the operations, see below or see Help.
3. Follow the instructions on the screen to complete the wizard.
When you are finished adding an HMI server, you can set up the HMI
server’s properties. For details, see page 5-16.
Creating a new HMI server
To create a new HMI server that is not based on an existing HMI
server, HMI project, or RSView32 application, click Create a new
HMI server.
When you create an HMI server, the server’s HMI project is created
automatically.
Copying an HMI server
To make a copy of an existing HMI server, click Copy an HMI server.
After you have copied an HMI server, changes made to the original do
not affect the copy, or vice versa.
5–12 RSView Supervisory Edition User’s Guide