RSView Supervisory Edition Installation Guide

For an explanation of RSView command syntax, see Appendix A,
RSView commands, or see Help.
Ways to start derived tag processing
Distributed and stand-alone applications
• In the Components tab of the HMI Server Properties dialog, click
the Derived tags check box and then specify a derived tag
component. The derived tag component will start the next time the
HMI server runs, or when the HMI server’s components are
started manually.
• In the Macros editor, create a macro that contains the command,
DerivedOn . In the Components tab of the HMI
Server Properties dialog, click the Macro check box in On startup
components list, and then specify the macro. When RSView Studio
starts, derived tags processing starts.
• In the Events editor, specify the DerivedOn command
as the action for an event.
• At the command line in RSView Studio, or the RSView
Administration Console, type DerivedOn and then
press Enter.
Stand-alone applications only
• In the Graphic Displays editor, create a button and then specify the
DerivedOn command as the button’s press action.
When the button is pressed, derived tag processing starts.
• In the Graphic Displays editor, create a graphic object and then
attach touch animation with the DerivedOn command
as the object’s action. When the object is touched, derived tag
processing starts.
10–6 RSView Supervisory Edition User’s Guide