RSView Supervisory Edition Installation Guide

5. In the RsAlmLogExpServ Properties dialog box, click the Identity
tab.
6. If you are using a mapped network drive, click ‘The interactive
user’ and then click OK.
If you are using a network share or UNC path, click ‘This user’, and
then type the name and password of a user that has access to the
network path and database. This applies to step 9 as well.
7. In the Applications list, click RsAlmLogService Class and then
click Properties.
8. In the RsAlmLogService Class Properties dialog box, click the
Identity tab.
9. Follow the directions for step 6.
10. Click OK and then restart the computer.
IMPORTANT
When using the DCOM setting ‘This user’, if the
password requires periodic changes, this DCOM setting
must be modified manually to reflect the changes.
To change the security account of the alarm log program
files in Windows XP (SP1)
1. On the computer on which alarm monitoring will run, click the
Windows Start button, and then click Run.
2. In the Open box, type dcomcnfg, and then press Enter.
3. In the left-hand side of the Component Services window, doubleclick
Component Services, double-click the Computers folder,
double-click My Computer, and then double-click DCOM Config.
If DCOM Configuration Warning messages appear, click No for
each one.
11–38 RSView Supervisory Edition User’s Guide