Glandless Pumps - THERMO-ECO-ENGINEERING úvod

Pump Management Systems Wilo-Control
Pump Control
Series description Wilo-IR-Monitor
Wilo-IR-Monitor
Technical Data
Fig.:
Wilo-IR-Monitor; Operating and service unit for pump monitoring
Application
Modern operating and servicing equipment for user-friendly remote
control of the electronically controlled Wilo pumps with infrared
interface of the following Wilo series:
- Stratos/Stratos-Z/Stratos-D/Stratos-ZD
-TOP-E/-ED
-VeroLine-IP-E
-VeroTwin-DP-E
- CronoLine-IL-E
- CronoTwin-DL-E
The IR-Monitor can be used in conjunction with all conventional
glandless and glanded pumps without IR interfaces. It is capable of
checking the direction of rotation, the rotating-field frequency and
the current operating status of each pump and standard motor with
the IR-Monitor.
The Wilo-IR-Monitor serves to remotely monitor the numerous pump
functions by wireless control. All operating steps and status reports
are clearly graphically displayed.
Functional features of the IR-Monitor are closely linked with the
attributes of the high-efficiency and/or energy-saving pumps. Operation
of the IR-Monitor corresponds to that of the pump itself, i.e.
Modification and confirmation of the values that have been newly
adjusted is carried out by rotating and pressing the red operating
button (one-button operation).
The functional capacity has mainly been tailored for the use by contractors
and service personnel.
Design
Shock resistant due to its sturdy and robust plastic casing and the
scratch-resistant monitor screen. A carrying case for additional protection
is also included in the scope of delivery.
Wilo-IR-Monitor
Protection class IP 43
Vibration resistance DIN EN 60068-2-6
Operating temperature -10 °C to +40 °C
Storage temperature -20 °C to +70 °C
Transmit/receive range
max. 8 m
Display
50 x 50 mm,
with switch-on backlighting
Voltage supply
2 pc. Mignon alkali battery cells
1.5 V size AA
(included in the scope of delivery)
Operating duration
about 24 hrs. when on and
illuminated
Data buffer
EE-Prom
Emitted interference EN 61000-6-3
Immunity to interference EN 61000-6-2
Automatic interchange linkup
The information exchange between the IR-Monitor and the pump is
wireless by infrared light. An automatic interchange built-up will, on
congested plant layouts (e.g. a number of pumps installed closely
side-by-side), avoid the simultaneous activation of different pumps
and will thus establish a correct data exchange between the selected
pump and the IR-Monitor. Manual coding of the individual pumps is
not required.
Data memory
Operating data logged immediately prior to a fault event will be
recorded in the pump and be made further use of for data analysis
with the IR-Monitor.
Statistical functions
The hydraulic performance (volumetric flow) of the relevant pump
can be viewed with the IR-Monitor in a statistical histogram.
The load profile of the hydraulic plant will thus become perceptible
over the range of a defined operating period.
A non-fading data memory (EE-Prom) is available for the buffering of
statistical and preset values
Battery monitoring
Battery condition is subject to constant check. A warning light will be
displayed to indicate fading capacity
Heating, Air-conditioning,
Cooling
Potable water circulation
Solar thermal
Service/Accessories, Systems
Switchgears and Control Devices
Pump Management Systems
Wilo Catalogue A1 - Circulating pumps in glandless design
429