17.10.2014 Views

Xeon-Phi-Coprocessor-Datasheet

Xeon-Phi-Coprocessor-Datasheet

Xeon-Phi-Coprocessor-Datasheet

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

The sensor names in the IPMI SDR are static and do not change from release to<br />

release. The IPMI sensor numbers are not static and may change between releases;<br />

hence the sensor number should be discovered during the normal sensor discovery<br />

process because additional sensors may be added in the future.<br />

During the normal sensor discovery process, reading the SDR returns the sensors<br />

available on the coprocessor. There is a sensor name and sensor number associated<br />

with each sensor. Once the sensor number is determined by comparing the sensor<br />

name that is desired to be read, the sensor number may be used by the management<br />

firmware for reading a particular sensor. It is important that the firmware does not<br />

hard code the sensor number as it may change in future releases. It is strongly<br />

recommended to use the sensor name if it is "hard-coded" into the management<br />

firmware to discover the sensor number, this will ensure the correct sensor is read and<br />

will return valid data with future releases of the SMC firmware. Table 6-25 is a list of<br />

the current sensor names.<br />

Table 6-25.<br />

Table of Sensors<br />

Sensor Type<br />

Sensor Description<br />

POWER<br />

power_pcie Power measured at the PCI-e edge fingers input.<br />

power_2x3 Power measured at the 2x3 Aux connector input. (N/A for 5120D)<br />

power_2x4 Power measured at the 2x4 Aux connector input. (N/A for 5120D)<br />

power_pv Power output reported by the Core VR.<br />

power_vddq Power output reported by the VDDQ VR.<br />

power_vddg Power output reported by the VDDG VR.<br />

avg_power0 Average power consumption over Limit Time Window 0.<br />

avg_power1 Average power consumption over Limit Time Window 1.<br />

Instpwr Instantaneous power consumption reading.<br />

Instpwrmax Maximum instantaneous power consumption observed.<br />

VOLTAGE<br />

pv_volt Voltage reported from the Core VR.<br />

vddq_volt Voltage reported from the VDDQ VR.<br />

vddg_volt Voltage reported from the VDDG VR.<br />

TEMP<br />

east_temp Temperature sensor on the eastern-most side of the board. (N/A for 5120D)<br />

gddr_temp Temperature sensor closest to the GDDR memory devices.<br />

west_temp Temperature sensor on the western-most side of the board. (N/A for 5120D<br />

pv_vrtemp Temperature reported from the Core VR.<br />

vddq_temp Temperature reported from the VDDQ VR.<br />

vddg_temp Temperature reported from the VDDG VR.<br />

proc_temp Temperature reported by the Intel(R) <strong>Xeon</strong> <strong>Phi</strong>(TM) chip DTS<br />

exhst_temp Highest of discrete temperature sensors on the board.<br />

inlet_temp Lowest of discrete temperature sensors on the board.<br />

FAN<br />

fan_pwm Fan PWM driven by SMC software (N/A for passive SKUs, 5120D).<br />

Intel ® <strong>Xeon</strong> <strong>Phi</strong> <strong>Coprocessor</strong> <strong>Datasheet</strong><br />

76<br />

Document ID Number: 328209 003EN

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!