FS2004 Users Manual - FuturePlus Systems

For 16540/541 Logic Analyzers
Logic Analyzer FS2004 Comment
16540 Pod 1 Header 3 J clock
16541 Pod 1 Header 1
16541 Pod 2 Header 2
16541 Pod 3 Header 4
All Other Logic Analyzers Except The 16540/541
Logic Analyzer FS2004 Comment
POD 1 Header 1
POD 2 Header 2
POD 3 Header 3 L Clock (C3 on
1680/90)
POD 4 Header 4
User Pins
FS2004 Header 4,2 and 1 each contains user defined pins.
These pins are available to the user to connect whatever
additional signals the users wishes to view along with the PC
Card Cardbus signals. These pins are located on the logic
analyzer interface module and clearly marked. The FS2004
configuration software will configure the user pins to appear as
follows:
• User1-User4 on POD 4 channels 12 thru 15.
• User5 on POD 1 channel 16.
• User6 on POD 2 channel 16.
How to install a PC
Card Cardbus add-in
card into the FS2004
Using the PC Card Cardbus Preprocessor is relatively
straightforward. The extender card is inserted into the desired
slot in the host system. Then the PC Card Cardbus card under
test is inserted into the card connector. Simply align the PC
Card under test with the connector and gently push the module
in until it is seated in the connector.
11