FS2004 Users Manual - FuturePlus Systems
FS2004 Users Manual - FuturePlus Systems
FS2004 Users Manual - FuturePlus Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Label<br />
Clk<br />
Inputs<br />
Pod 4 Pod 3 Pod 2 Pod 1<br />
FRAME 8<br />
TRDY 9<br />
PC Card<br />
Cardbus<br />
CLK<br />
L<br />
IDSEL 2<br />
GNT 3<br />
REQ 4<br />
CYCLE 9-7 9-4<br />
The STAT variable<br />
The STAT variable is used by the PC Card Cardbus inverse<br />
assembler to decode PC Card Cardbus bus transactions. It<br />
should not be changed or deleted from the format menu. The<br />
signals that make up the STAT variable are listed in the following<br />
table. The STAT variable can be useful to set up SYMBOLS<br />
since it contains all of the key PC Card Cardbus control and<br />
status signals.<br />
STAT Variable<br />
PC Card Cardbus Bus<br />
Signal Name<br />
Bit 24<br />
Bit 23<br />
Bit 22<br />
Bit 21<br />
Bit 20<br />
Bit 19<br />
Bit 18<br />
Bit 17<br />
Bit 16<br />
Bit 15<br />
Bit 14<br />
Bit 13<br />
Bit 12<br />
Bit 11<br />
TRDY#<br />
FRAME#<br />
IRDY#<br />
SDONE<br />
SB0#<br />
REQ#<br />
GNT#<br />
IDSEL<br />
ACK64#<br />
REQ64#<br />
INTD#<br />
INTC#<br />
INTB#<br />
INTA#<br />
20