Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Cleaning <strong>and</strong> care<br />
<strong>Oven</strong> interior<br />
The oven interior is coated with dark<br />
pyrolytic enamel which facilitates<br />
cleaning.<br />
This is a particularly hard enamel with<br />
an extremely smooth surface <strong>and</strong> very<br />
good anti-stick properties.<br />
Manual cleaning of the oven interior<br />
Allow the oven to cool down before<br />
cleaning by h<strong>and</strong>.<br />
Danger of burning!<br />
The oven interior <strong>and</strong> the inside of<br />
the door should be cleaned after<br />
each use. If this is not done<br />
subsequent soiling from baking <strong>and</strong><br />
roasting will become worse <strong>and</strong><br />
make cleaning harder. In extreme<br />
cases, heavy soiling could even<br />
damage the surface.<br />
There is a fibre-glass door seal<br />
around the oven cavity.<br />
This seal is particularly sensitive <strong>and</strong><br />
should not be cleaned unless<br />
absolutely necessary. Rubbing it<br />
can damage it.<br />
Most cooking residues can be removed<br />
with a damp cloth <strong>and</strong> a mild solution of<br />
hot water <strong>and</strong> washing-up liquid.<br />
Never use hard brushes, hard<br />
sponges, wire wool pads*, knives or<br />
any other abrasive materials or<br />
cleaning agents. They can damage<br />
the enamel.<br />
If using an oven spray, the<br />
manufacturer's <strong>instructions</strong> must be<br />
followed.<br />
* Non-abrasive spiral pads can,<br />
however, be used.<br />
To make cleaning easier<br />
– remove the oven door,<br />
– dismantle the door,<br />
– take out the runners,<br />
– lower the top heating/grill element.<br />
Instructions for doing so are given<br />
further on in this section.<br />
55