Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Problem solving guide<br />
Problem<br />
The time of day or<br />
"i2:00" is flashing in<br />
the display.<br />
A noise can be<br />
heard after a<br />
cooking<br />
programme.<br />
The interior lighting<br />
is not working.<br />
Cakes <strong>and</strong> biscuits<br />
are not cooked<br />
properly after<br />
following the times<br />
given in the chart.<br />
Cakes/biscuits are<br />
browning unevenly.<br />
Possible cause <strong>and</strong> remedy<br />
There has been a power cut.<br />
Confirm the time of day with the OK sensor or reset the<br />
time.<br />
You will have to enter programmed cooking processes<br />
again.<br />
This is not a fault. The cooling fan continues to run for a<br />
while after a programme has finished. When the<br />
temperature has fallen sufficiently, the fan switches off<br />
automatically.<br />
Disconnect the appliance from the electricity supply.<br />
Turn the lamp cover a quarter turn anti-clockwise to<br />
release it <strong>and</strong> then pull it downwards to take it out.<br />
Replace it with a new halogen lamp (Osram 66725 AM/A,<br />
230 V, 25 W, G9).<br />
Refit the lamp cover <strong>and</strong> turn it clockwise to secure it.<br />
Reconnect the appliance to the mains electricity supply.<br />
– Check that the correct temperature has been set.<br />
– Check whether there has been a change to the recipe.<br />
The addition of more liquid or more eggs makes a<br />
moister mix which would need longer to cook.<br />
There will always be a slight unevenness. If browning is<br />
very uneven check that the correct temperature was set<br />
<strong>and</strong> that the correct shelf level was used.<br />
With Conventional heat the material <strong>and</strong> colour of the tin<br />
used plays an important role. Light coloured, shiny tins are<br />
less suitable.<br />
67