Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
Operating and installation instructions Oven H 5141 BP, H 5241 BP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Problem solving guide<br />
Problem<br />
The door cannot be<br />
opened at the end<br />
of a pyrolytic<br />
cleaning<br />
programme.<br />
A fault code<br />
appears in the<br />
display: F+a<br />
number<br />
Possible cause <strong>and</strong> remedy<br />
Switch the appliance off. If the door lock will still not open<br />
please contact Miele (you cannot open the door if the oven<br />
temperature is above 280 °C).<br />
You can rectify the faults with the following codes yourself:<br />
– Fault 23: The temperature required for pyrolytic cleaning<br />
was not reached.<br />
This could have been caused by too much soiling in the<br />
oven to start with.<br />
Remove all coarse soiling before starting the pyrolytic<br />
cleaning programme again.<br />
If the fault code appears again please contact Miele.<br />
– Fault 32: The door has not locked for the pyrolytic<br />
cleaning process.<br />
Switch the oven off <strong>and</strong> start the pyrolytic cleaning<br />
process again.<br />
If the fault code appears again call Miele.<br />
– Fault 33: The door lock for the pyrolytic cleaning process<br />
will not open.<br />
Interrupt the pyrolytic cleaning programme by switching<br />
the oven off. If the door will still not open please contact<br />
Miele.<br />
– Fault 55: Safety switch-off has been triggered.<br />
The appliance will be ready for use again after it has<br />
been switched off <strong>and</strong> then back on again.<br />
For all other fault codes please contact Miele.<br />
68
Change language