MOTOX Gearbox for monorail conveyors - DS TECH

More documents

Recommendations

Info

General information and safety notes 1.5 Particular type of risk and personal protective equipment BA 2515 12 Operating Instructions, 04/2011
Technical description 2 2.1 General description The gearbox is supplied as a helical worm gearbox CH., as a 2-stage bevel helical gearbox BH., or as a 3-stage bevel helical gearbox KH. It is equipped with a mechanical clutch. The gearbox is suitable for use as a monorail conveyor drive in accordance with VDI guideline 3643. Gearbox types CHF28 and BH.38 correspond to the VDI guideline 3643. They are used to transport goods in roofed over industrial applications. They can be used outdoors if the necessary contractual arrangements are made. The gearbox is suitable for various mounting positions. Observe the correct oil level. Housing The gearbox housing is made of gray cast iron. Geared components The geared components of the gearboxes are hardened. In the case of helical worm gearboxes the worm is hardened and ground, and the gear is manufactured from bronze. The bevel gear stage of the bevel helical gearbox is lapped in pairs. Lubrication The geared components are supplied with adequate lubricant by means of dip lubrication. Shaft bearings All shafts are mounted in roller bearings. The roller bearings are lubricated by means of dip lubrication or oil spray lubrication. Bearings that are not supplied with lubricant are closed and grease-lubricated. Shaft seals The radial shaft sealing ring, combination shaft sealing ring, labyrinth seal, and slide ring seal at the shaft outlet prevent lubricant from escaping from the housing and impurities from entering it. BA 2515 Operating Instructions, 04/2011 13
Page 1: MOTOX Gearbox for monorail conveyor
Page 4 and 5: Legal information Legal information
Page 6 and 7: Table of contents 6 Operation......
Page 8 and 9: Table of contents BA 2515 6 Operati
Page 10 and 11: General information and safety note
Page 12 and 13: General information and safety note
Page 16 and 17: Technical description 2.1 General d
Page 18 and 19: Technical description 2.2 Surface t
Page 20 and 21: Technical description 2.2 Surface t
Page 22 and 23: Incoming goods, transport, and stor
Page 28 and 29: Installation 4.2 General informatio
Page 30 and 31: Installation 4.5 Gearbox with foot
Page 32 and 33: Installation 4.7 Mounting the input
Page 34 and 35: Commissioning 5.2 Fitting the gearb
Page 36 and 37: Operation Operating the clutch DANG
Page 38 and 39: Faults, causes and remedies Faults
Page 40 and 41: Faults, causes and remedies Faults
Page 42 and 43: Service and maintenance 8.1 General
Page 44 and 45: Service and maintenance 8.2 Checkin
Page 56 and 57: Service and maintenance 8.5 Cleanin
Page 58 and 59: Service and maintenance 8.8 Inspect
Page 60 and 61: Disposal BA 2515 58 Operating Instr
Page 62 and 63: Technical specifications 10.2 Gener
Page 64 and 65:
Technical specifications 10.4 Sound
Page 66 and 67:
Technical specifications 10.5 Desig
Page 68 and 69:
Technical specifications 10.5 Desig
Page 70 and 71:
Technical specifications 10.6 Oil q
Page 72 and 73:
Spare parts 11.2 Spare parts lists
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80:
Declaration of Incorporation BA 251
show all

MOTOX Gearbox for monorail conveyors - DS TECH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?