MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Service and maintenance<br />
8.2 Checking and changing lubricants<br />
8.2.11 Recommended lubricants<br />
DANGER<br />
The lubricants used have not been approved to USDA -H1/-H2 (United States Department<br />
of Agriculture). They are not or only conditionally approved <strong>for</strong> use in the foodstuffs or<br />
pharmaceutical industry. If lubricants with USDA -H1/-H2 approval are required, please<br />
contact Technical Support.<br />
CAUTION<br />
If you are working outside the temperature range specified in the Flender Operating<br />
Instructions BA 7300, please contact Technical Support <strong>for</strong> advice on which oil to use.<br />
If the housing temperature exceeds a value of +80 °C, please contact Technical Support.<br />
Note<br />
The lubricants used are not or are only conditionally biodegradable. If lubricants classified as<br />
biodegradable are required, please contact Technical Support.<br />
Note<br />
These recommendations are not a guarantee of the quality of the lubricant provided by your<br />
supplier. All lubricant manufacturers are responsible <strong>for</strong> the quality of their own products.<br />
The oil selected <strong>for</strong> use in the gearbox must be of the viscosity stated on the rating plate<br />
(ISO VG class). The viscosity class indicated applies <strong>for</strong> the contractually agreed operating<br />
conditions.<br />
In the case of different operating conditions, please contact Technical Support.<br />
The lubricants suitable <strong>for</strong> use in the gearbox are listed in the Operating Instructions<br />
BA 7300 "<strong>Gearbox</strong> Lubrication". We are familiar with the composition of these lubricants and,<br />
as far as we are currently aware, they possess state-of-the-art properties with regard to loadbearing<br />
capacity, corrosion resistance (FZG test DIN 51354 = <strong>for</strong>ce level > 12), resistance to<br />
gray staining and compatibility with seals and interior paint finishes as necessary <strong>for</strong> the type<br />
of gearbox concerned. There<strong>for</strong>e, we advise our customers to select one of the lubricants<br />
listed in this table, taking into account the VG class specified on the rating plate.<br />
If, following agreement, gearboxes are filled at the factory with special lubricants <strong>for</strong> the<br />
special applications referred to above, this is shown on the rating plate.<br />
The warranty conditions are valid only <strong>for</strong> the lubricants listed in the Flender Operating<br />
Instructions BA 7300. If you decide to use a different oil, you are responsible <strong>for</strong> the technical<br />
suitability of the lubricant.<br />
BA 2515<br />
52 Operating Instructions, 04/2011