MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation<br />
4.7 Mounting the input or output element on the gearbox<br />
Use a fitting device to fit the input or output elements.<br />
Figure 4-1<br />
Example of a fitting device<br />
Observe the correct mounting arrangement to minimize stress on shafts and bearings due to<br />
lateral <strong>for</strong>ces.<br />
Correct<br />
Incorrect<br />
<br />
<br />
<br />
<br />
a<br />
F<br />
Hub<br />
Force<br />
Figure 4-2<br />
Mounting arrangement <strong>for</strong> minimum stress on shafts and bearings<br />
Procedure<br />
1. Using either benzine or solvent, remove the anti-corrosion protection from the shaft ends<br />
and flanges and remove the protective skin provided.<br />
2. Fit the input and output elements onto the shafts and secure them if necessary.<br />
You have now fitted the input or output element.<br />
BA 2515<br />
30 Operating Instructions, 04/2011