MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Service and maintenance<br />
8.2 Checking and changing lubricants<br />
8.2.6.2 Draining the oil<br />
Observe the symbols in the type of construction diagrams, see Designs (Page 63):<br />
Ventilation Oil filling Oil level Oil drain<br />
Procedure<br />
1. Switch off the power supply to the drive unit.<br />
2. Unscrew the vent plug.<br />
3. Unscrew the oil level screw.<br />
4. Place a suitable and sufficiently large receptacle underneath the oil drain plug.<br />
5. Remove the oil drain plug and drain all the oil into the receptacle.<br />
6. Check the condition of the sealing ring on the sealing element and replace the sealing<br />
ring if necessary.<br />
7. Seal the gearbox using the sealing elements.<br />
You have now drained the oil from the gearbox.<br />
BA 2515<br />
46 Operating Instructions, 04/2011