MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Commissioning<br />
5.2 Fitting the gearbox ventilation<br />
Observe the symbol in the type of construction diagrams, see Designs (Page 63):<br />
Ventilation<br />
Procedure<br />
1. Unscrew the vent plug.<br />
2. Seal the gearbox with the vent filter or the pressure breather valve without securing clip.<br />
You have now replaced the vent filter or pressure breather valve with the vent plug without<br />
the securing clip.<br />
5.2.2 Installing the pressure breather valve with securing clip (optional)<br />
The pressure breather valve with securing clip 1 is fitted to gearboxes which require<br />
housing ventilation.<br />
<br />
Figure 5-1<br />
Pressure breather valve with securing clip<br />
Remove the transport fixture by pulling the securing clip 1 in the direction of the arrow.<br />
BA 2515<br />
32 Operating Instructions, 04/2011