MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
MOTOX Gearbox for monorail conveyors - DS TECH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Declaration of Incorporation 12<br />
Declaration of Incorporation according to Directive 2006/42/EC Annex II 1 B.<br />
The manufacturer Siemens Geared Motors GmbH, 72072 Tübingen, Germany, declares <strong>for</strong><br />
the partly completed machines <strong>MOTOX</strong> gearboxes <strong>for</strong> <strong>monorail</strong> <strong>conveyors</strong> BHF38, BHB38,<br />
KHF48, KHF68, KHZ48, CHF28, CHF48, CHF68, CHZ48:<br />
The special technical documentation was generated according to Annex VII B.<br />
The following essential health and safety requirements from Directive 2006/42/EC Annex I<br />
apply and have been fulfilled:<br />
● 1.1, 1.1.2, 1.1.3, 1.1.5<br />
● 1.2.4.4, 1.2.6<br />
● 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.8.1<br />
● 1.4.1, 1.4.2, 1.4.2.1<br />
● 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15<br />
● 1.6.1, 1.6.2<br />
● 1.7.1, 1.7.1.1, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3<br />
The partly completed machine may only be commissioned once it has been established, if<br />
applicable, that the machine in which the partly completed machine is to be incorporated<br />
meets the provisions of Directive 2006/42/EC.<br />
The manufacturer is obligated to transmit the special technical documentation <strong>for</strong> the partly<br />
completed machine in electronic <strong>for</strong>m to national authorities upon legitimate request.<br />
Person authorized to compile the relevant technical documentation: Georg Böing, Head of<br />
Research and Development Gears.<br />
Tübingen, April 11, 2011<br />
Georg Böing<br />
Head of Research & Development Gears<br />
Jürgen Pflaum<br />
Head of Quality Management<br />
BA 2515<br />
Operating Instructions, 04/2011 77