MOTOX Gearbox for monorail conveyors - DS TECH

Incoming goods, transport, and storage
3.3 Bearings
3.3.3 Storage up to 36 months with long-term preservation (optional)
CAUTION
The gearbox is completely filled with operating oil and closed airtight with a plug or by
pressure venting with transport fixture.
Check the oil level before commissioning.
Store the gearbox or geared motor in dry, dust-free, and temperate locations. Special
packing is then not necessary.
Otherwise, the gearbox or geared motor must be packed in plastic film or packed in airtight
sealed film and water absorbing agents. Cover them to provide protection against sun and
rain.
The storage location must be vibration- and shock-free.
The free shaft ends, sealing elements and flanges must be coated with a protective layer of
grease.
The life of the corrosion protection is 36 months from delivery.
Do not reduce the oil level during short-time startup for 10 minutes in no-load operation.
Carry out the following precautionary measures after every period of 6 months in storage:
Table 3- 3
Preventive action
Action
Storage period in months
6 12 18 24 30 36
Checking the insulation resistance - - x x x x
Short-time startup:
no-load operation, approximately 10 minutes at rated
voltage
- - x x x x
Touch up / re-apply the protective layer of grease - - x x x x
Check the cover and preservation x x x x x x
BA 2515
24 Operating Instructions, 04/2011