MODEL NO: GPS NAVIGATION SYSTEM - Zenec
MODEL NO: GPS NAVIGATION SYSTEM - Zenec
MODEL NO: GPS NAVIGATION SYSTEM - Zenec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Button<br />
<br />
<br />
Description<br />
Building Visibility: Full 3D city building data that represents<br />
actual building size and position on the map. Building data is<br />
limited to the city centres of major cities in the US and Europe.<br />
Terrain Detail Level: 3D terrain map data shows changes in<br />
terrain, elevations or depressions in the land when you view the<br />
map, and use it to plot the route map in 3D when you navigate.<br />
Colour Profiles<br />
Elevation on 2D Map<br />
Show Street Names<br />
Lane Information<br />
ZENEC Navigation Software is able to show the map and the menus<br />
in different colours during the day and during the night. Select the<br />
colour profiles to be used in each mode, and select the automatic or<br />
manual switching between the daytime and night colour profiles.<br />
2D maps can also display 3D information. These top-down maps can<br />
display elevation by colours and shading.<br />
Street names and POI icons can be disturbing on the map during<br />
navigation. With this switch you can suppress these map elements<br />
when ZENEC Navigation Software is following your position on the<br />
map. If you move the map, both the street names and POI icons<br />
reappear immediately.<br />
Some maps contain lane information to help you position your car in<br />
the upcoming intersection. This setting tells ZENEC Navigation<br />
Software whether to display this information at the top or at the bottom<br />
of the map.<br />
4.5.2 Navigation settings<br />
You can control how ZENEC Navigation Software behaves during navigation. Tap the following<br />
buttons: , , .<br />
Button<br />
Keep Position on Road<br />
Off-route Recalculation<br />
Restore Lock-to-Position<br />
Description<br />
This feature allows car drivers to always correct <strong>GPS</strong> position errors<br />
by matching the vehicle position to the road network.<br />
By turning off this feature you also turn off the <strong>GPS</strong> position error<br />
filtering. The position shown on the map will be subject to all position<br />
errors and position fluctuations.<br />
This switch tells ZENEC Navigation Software whether to automatically<br />
recalculate the route when you deviate from it. If this feature is turned<br />
off, you need to initiate route recalculation manually otherwise<br />
navigation will be stopped until you return to the originally<br />
recommended route.<br />
Setting another point than the current <strong>GPS</strong> position as the start point<br />
of the active route will automatically disable this feature.<br />
If you have moved or rotated the map during navigation, this feature<br />
moves the map back to your current <strong>GPS</strong> position and re-enables<br />
automatic map rotation after the given period of inactivity.<br />
57