Operating instructions - EWM Hightec Welding GmbH
Operating instructions - EWM Hightec Welding GmbH
Operating instructions - EWM Hightec Welding GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> problems, causes and remedies<br />
Resetting welding parameters to the factory settings<br />
9.2 Resetting welding parameters to the factory settings<br />
NOTE<br />
All customised welding parameters that are stored will be replaced by the factory<br />
settings.<br />
0<br />
1<br />
0<br />
1<br />
Figure 9-1<br />
Display<br />
Setting/selection<br />
Exit the menu<br />
Exit<br />
Service menu<br />
Modifications to the service menu may only be carried out by authorised maintenance<br />
staff!<br />
Reset (reset to factory settings)<br />
• off = aus (factory setting)<br />
• CFG = Reset the values in the machine configuration menu<br />
• CPL = Complete reset of all values and settings<br />
The reset is performed when leaving the menu (EXIT).<br />
Switch off<br />
Switching off machine function<br />
Reset machine configuration<br />
Resetting the values in the machine configuration menu<br />
Complete reset<br />
Complete reset of all values and settings by the factory settings<br />
Item No.: 099-000097-<strong>EWM</strong>01 75