Operating instructions - EWM Hightec Welding GmbH

More documents

Recommendations

Info

Safety instructions Notes on the use of these operating instructions 2 Safety instructions 2.1 Notes on the use of these operating instructions DANGER Working or operating procedures which must be closely observed to prevent imminent serious and even fatal injuries. • Safety notes include the "DANGER" keyword in the heading with a general warning symbol. • The hazard is also highlighted using a symbol on the edge of the page. WARNING Working or operating procedures which must be closely observed to prevent serious and even fatal injuries. • Safety notes include the "WARNING" keyword in the heading with a general warning symbol. • The hazard is also highlighted using a symbol in the page margin. CAUTION Working or operating procedures which must be closely observed to prevent possible minor personal injury. • The safety information includes the "CAUTION" keyword in its heading with a general warning symbol. • The risk is explained using a symbol on the edge of the page. CAUTION Working and operating procedures which must be followed precisely to avoid damaging or destroying the product. • The safety information includes the "CAUTION" keyword in its heading without a general warning symbol. • The hazard is explained using a symbol at the edge of the page. NOTE Special technical points which users must observe. • Notes include the "NOTE" keyword in the heading without a general warning symbol. • Notes are highlighted using a "hand" symbol at the edge of the page. 8 Item No.: 099-000097-EWM01
Safety instructions Notes on the use of these operating instructions Instructions and lists detailing step-by-step actions for given situations can be recognised via bullet points, e.g.: • Insert the welding current lead socket into the relevant socket and lock. Symbol Description Press Do not press Turn Switch 0 1 Switch off machine 0 1 Switch on machine ENTER (enter the menu) NAVIGATION (Navigating in the menu) EXIT (Exit the menu) Time display (example: wait 4s/press) Interruption in the menu display (other setting options possible) Tool not required/do not use Tool required/use Item No.: 099-000097-EWM01 9
Page 1 and 2: EWM HIGHTEC WELDING GmbH Dr. Günte
Page 3 and 4: Machine and Company Data Please ent
Page 5 and 6: Contents Notes on the use of these
Page 7: Contents Notes on the use of these
Page 11 and 12: Safety instructions General WARNING
Page 13 and 14: Safety instructions Transport and i
Page 15 and 16: 3 Technical data 3.1 TETRIX 180 COM
Page 17 and 18: Machine description TETRIX 180 COMF
Page 19 and 20: Machine description Machine control
Page 21 and 22: Machine description Machine control
Page 23 and 24: Functional characteristics Operatin
Page 45 and 46: Functional characteristics MMA weld
Page 47 and 48: Functional characteristics Remote c
Page 49 and 50: Functional characteristics Advanced
Page 51 and 52: Functional characteristics Advanced
Page 53 and 54: Functional characteristics Interfac
Page 55 and 56: Functional characteristics Menus an
Page 57 and 58: Functional characteristics Menus an
Page 59 and 60:
Commissioning Area of application -
Page 61 and 62:
6.7 TIG welding 6.7.1 Welding torch
Page 63 and 64:
Commissioning TIG welding 6.7.4.1 C
Page 65 and 66:
Commissioning MMA welding • Inser
Page 67 and 68:
Maintenance and testing Test 7.3 Te
Page 69 and 70:
Maintenance and testing Test 7.3.6
Page 71 and 72:
Maintenance and testing Disposing o
Page 73 and 74:
Warranty Warranty Declaration 8.2 W
Page 75 and 76:
Operating problems, causes and reme
Page 77 and 78:
9.4 General operating problems Oper
Page 79 and 80:
Circuit diagrams TETRIX 180 COMFORT
Page 81:
12 Appendix A 12.1 Declaration of C
show all

Operating instructions - EWM Hightec Welding GmbH

Create successful ePaper yourself

Delete template?

Save as template?