tors actuators - Norgren Pneumatics. Motion Control Equipment ...

Options selector
Opitional finish
Standard caps
Substitute
Blank
Black anodized caps and carriage
A
Black anodized caps and carriage
AS
with stainless steel hardware
Note: Options A and AS available only on metric port.
Ports
Substitute
NPT ports (Ø 20 to 80 mm)
C
Metric ports (Ø 16 to 80 mm)
M
Guiding system
Substitute
Internal 0
External 1
Roller 2
Cylinder Ø (mm)
Substitute
16 16
20 20
25 25
32 32
40 40
50 50
63 63
80 80
Note: Disregard option positions not used.
For combinations of cylinder variants consult our Technical Service.
This options selector explains only the cylinder variants.
Additional variants/options are not possible.
C / 146 ˙˙˙ / MC / ˙˙˙˙
C/146000, C/146100, C/146200
Strokes (on request)
Provide in Inches
Provide in Metric
C version
M version
Options (magnetic piston) STD.
Substitute
Magnetic piston
M
(standard on 16, 20, and 80 mm bores)
Alternative ports MC 1
(standard 25, 32, 40, 50, 63 mm bores)
Active brake (25 to 63 mm bores)
L3
Passive brake (25 to 63 mm bores)
L4
With added caged ball linear motion guide PM†
With linear position sensor (32 to 63 mm bores) F1
Double carriages *
MD**
* For C/146100 & C/146200 only
** MD option available in 1461** External
and 1462** Roller guided carriage
C/146***/MD/****/****
Effective
Distance between
stroke
carriage centers (inches)
1 Not available on 16, 20, 80 mm bores.
† Order PM option as 1462**
Ordering information
Cylinder
LINTRA ® cylinder with internal guiding system.
Ø 32 mm cylinder diameter and 10' (3000 mm) stroke
length with magnetic piston, and NPT ports.
Quote: C/146032/MC/120
ACTUATORS
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
ACT-103