tors actuators - Norgren Pneumatics. Motion Control Equipment ...
tors actuators - Norgren Pneumatics. Motion Control Equipment ...
tors actuators - Norgren Pneumatics. Motion Control Equipment ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ACTUATORS<br />
RPHD Series Magnetic Roundline<br />
Plus Stainless Steel Body Cylinders<br />
Double acting<br />
9/16" - 2-1/2" bores<br />
Technical Data<br />
Medium:<br />
Filtered, lubricated or nonlubricated,<br />
compressed air<br />
Maximum Operating<br />
Pressure:<br />
250 psig (17.2 bar)<br />
Temperature Range*:<br />
Standard nitrile seals:<br />
-20°F to 200°F (-29°C to 93°C)<br />
Viton / High temp seals:<br />
-20°F to 400°F (-29°C to 205°C)<br />
* With dew point of supply air less than air<br />
temperature below 36°F (2°C).<br />
Lubrication:<br />
All RPHD cylinders are prelubricated<br />
during assembly with a<br />
Teflon® based grease for nonlube<br />
service and long life.<br />
Materials:<br />
Cylinder Body:<br />
304 Stainless Steel<br />
Head and Cap:<br />
Aluminum alloy<br />
Piston Rods:<br />
300 series, chrome plated<br />
stainless steel<br />
Rod Bearings:<br />
Oil impregnated sintered bronze<br />
Piston:<br />
Aluminum Alloy or stainless steel<br />
Rod & Piston Seals: Nitrile<br />
Pivot bracket, rod clevis, foot<br />
bracket, mounting nut:<br />
Bright zinc plated carbon steel<br />
Options selector<br />
RPHD 106 x 3.250 - DAN - M2<br />
Series<br />
RPHD Series<br />
Magnetic<br />
Substitute<br />
RPHD<br />
Bore<br />
Substitute<br />
9/16" 056<br />
3/4" 075<br />
1-1/16" 106<br />
1-1/4" 125<br />
1-1/2" 150<br />
1-3/4" 175<br />
2" 200<br />
2-1/2" 250<br />
Stroke<br />
Increments of 1/16"<br />
up to 36"<br />
Options<br />
Substitute<br />
Viton / High Temp seals<br />
HT*<br />
Switch rail and position M1, M2, M3, M4<br />
Side Ported end cap<br />
PC<br />
(DAN mount only)<br />
Alternate port location<br />
PL(__)<br />
Plain rod end<br />
PR**<br />
Rod extension over std.<br />
RX(_)<br />
(specify additional length)<br />
Thread extension over std.<br />
TX(_)<br />
(specify additional length)<br />
Bumpers both ends<br />
UB*<br />
*Viton seals and Bumpers are available in<br />
combination; however, the temperature rating<br />
of the cylinder is limited to the maximum<br />
temperature rating of the bumpers.<br />
Note: The magnetic field could be<br />
compromised with temperatures in excess<br />
of 200°F.<br />
** PR Rod end will not have threads, but will<br />
maintian the standard “A” dimension.<br />
Mounting Options<br />
Substitute<br />
(All models are double acting)<br />
Nose<br />
DAN<br />
Double End (with pivot bushing) DAD<br />
Double Rod End<br />
DRD<br />
ACT-148<br />
<strong>Norgren</strong>.com/usa – 303.794.2611 – help@amer.norgren.com
Change language