tors actuators - Norgren Pneumatics. Motion Control Equipment ...

ACTUATORS
F-Series Plus Cylinders
Single and Double acting
9/16" to 4" bore
Force Factor Data
Bore Code Force Factor (Area)
Extend Retract
9/16" (056) 0.25 0.20
3/4" (075) 0.44 0.36
1-1/16" (106) 0.89 0.69
1-1/2" (150) 1.77 1.46
2" (200) 3.14 2.70
2-1/2" (250) 4.91 4.47
3" (300) 7.07 6.47
4" (400) 12.56 11.77
Force Output Formula
Cylinder Output Force = Force Factor (area) x Air Line
Pressure (psi)
Ex: 1-1/16 bore cylinder operating at 80 psi:
Force exerted on the extend: 0.89 x 80 = 71.2 lbs.
Force exerted on the retract: 0.69 x 80 = 55.2 lbs.
Approximate Cylinder Weights (lbs.)
FP FPD FPR, FPC Nose Mount Option
Bore Code Base Adder per Base Adder per Base Adder per Adder to Base Weight
1/8" 1/8" 1/8"
stroke stroke stroke
9/16" (056) 0.075 0.005 0.081 0.009 0.094 0.005 0.006
3/4" (075) 0.119 0.006 0.131 0.013 0.138 0.006 0.013
1-1/16" (106) 0.306 0.019 0.363 0.025 0.331 0.019 0.069
1-1/2" (150) 0.600 0.025 0.700 0.038 0.669 0.025 0.113
2" (200) 0.813 0.031 0.950 0.044 0.894 0.031 0.169
2-1/2" (250) 1.400 0.038 1.750 0.050 1.581 0.038 0.194
3" (300) 1.806 0.050 2.375 0.069 2.050 0.050 0.219
4" (400) 3.481 0.063 4.488 0.081 3.881 0.063 0.369
Spring Forces
Spring Rates
Bore Code Maximum 0.12 to 1" 1.001 to 2" 2.001 to 3" 3.001 to 4"
Force (lbs.) Stroke (lb/in) Stroke (lb/in) Stroke (lb/in) Stroke (lb/in)
9/16" (056) 5.25 4.25 1.75 1.24 0.88
3/4" (075) 10.00 6.00 2.50 1.76 1.25
1-1/16" (106) 11.50 6.00 2.50 1.76 1.25
1-1/2" (150) 13.00 5.50 2.25 1.60 1.13
2" (200) 13.00 5.50 2.25 1.60 1.13
2-1/2" (250) 25.00 6.50 2.75 1.93 1.38
3" (300) 25.00 6.50 2.75 1.93 1.38
4" (400) 25.00 6.50 2.75 1.93 1.38
Overall length adders for options
Length Adder
(Add to standard cataloged length)
Bore Code LF* HD**
(Low Friction (Heavy Duty PS (Magnetic Piston)
Seals) Cap) FP, FPD FPR FPC
9/16" (056) 0.25 0.13 0.88 0.63 0.38
3/4" (075) 0.25 0.13 0.88 0.88 0.88
1-1/16" (106) 0.38 0.19 0.88 0.88 0.88
1-1/2" (150) 0.38 0.19 0.88 0.88 0.88
2" (200) 0.38 0.19 0.88 0.88 0.88
2-1/2" (250) 0.38 0.25 0.88 0.88 0.88
3" (300) 0.50 0.25 0.88 0.88 0.88
4" (400) 0.50 0.38 0.88 0.88 0.88
*For Low Friction Seals used in combination with a magnetic piston, use the PS length adder only.
**For Heavy Duty End Cap used in combination with a magnetic piston, use both HD and PS length adders.
ACT-162
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com