tors actuators - Norgren Pneumatics. Motion Control Equipment ...
tors actuators - Norgren Pneumatics. Motion Control Equipment ...
tors actuators - Norgren Pneumatics. Motion Control Equipment ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ACTUATORS<br />
FPT Series F-Plus Twin Rod<br />
Non-Rotating Cylinders<br />
3/4" - 2" bores<br />
Technical Data<br />
Medium:<br />
Filtered, lubricated or nonlubricated,<br />
compressed air<br />
Maximum Operating<br />
Pressure:<br />
200 psig (13.6 bar)<br />
Temperature Range*:<br />
Standard nitrile seals:<br />
-40°F to 200°F (-40°C to 93°C)<br />
Viton / High temp seals:<br />
-20°F to 400°F (-29°C to 205°C)<br />
* With dew point of supply air less than air<br />
temperature below 36°F (2°C).<br />
Lubrication:<br />
All FPT cylinders are prelubricated<br />
during assembly with a<br />
Teflon® based grease for nonlube<br />
service and long life.<br />
Materials:<br />
Cylinder Body:<br />
304 Stainless Steel<br />
Head and Cap:<br />
Clear anodized aluminum<br />
Tooling Plate:<br />
Clear anodized aluminum<br />
Piston Rods:<br />
303 stainless steel<br />
Rod Bearings:<br />
Oil impregnated sintered<br />
bronze<br />
Piston:<br />
Aluminum Alloy<br />
Rod & Piston Seals:<br />
Nitrile<br />
Options selector<br />
FPT 106 x 1.750 - BAM - PS<br />
Series<br />
FPT F-Plus<br />
Twin Rod Cylinder<br />
Substitute<br />
FPT<br />
Bore<br />
Substitute<br />
3/4" 075<br />
1-1/16" 106<br />
1-1/2" 150<br />
2" 200<br />
Stroke<br />
Increments of 1/16"<br />
Options<br />
Substitute<br />
Counterbored Tool Plate<br />
CTP<br />
Viton / High Temp seals<br />
HT<br />
Switch rail and position M1, M2, M3, M4<br />
Magnetic Piston*<br />
PS<br />
Alternate port location<br />
PL(__)<br />
Rotated Pivot Mount<br />
RM<br />
(Pivot mount rotated 90° from standard)<br />
Rotated Tooling Plate<br />
RT<br />
(Tooling plate and rod axis will be vertical<br />
with respect to the ports)<br />
Rod extension over std.<br />
RX(_)<br />
(Specify additional length)<br />
Stainless Steel Fasteners<br />
SF<br />
(125 psi max)<br />
*Magnetic option used in combination with viton (HT)<br />
option is not reliable above 200°F. Overall cylinder<br />
length increases with magnetic option (see<br />
dimensional tables).<br />
Mounting Options<br />
Substitute<br />
Basic Mount<br />
BAM<br />
*Screw Clearance Holes Front SCF<br />
*Screw Clearance Holes Rear SCR<br />
*Screw Clearance Holes Both SCB<br />
Front Trunnion<br />
TMF<br />
Rear Trunnion<br />
TMR<br />
Trunnion Both Ends<br />
TMB<br />
Pivot Mount<br />
PTM<br />
Threaded Mounting Holes Front THF<br />
Threaded Mounting Holes Rear THC<br />
Threaded Mounting Holes Both Ends THB<br />
* Screw clearance to allow bolt head to<br />
pass through - no counter bores<br />
ACT-168<br />
<strong>Norgren</strong>.com/usa – 303.794.2611 – help@amer.norgren.com
Change language