LINEAR MOTION SYSTEMS

Redi-Rail ® Linear Guides
RR65 Rails (Metric) - Load Capacity up to 5,950 N
Linear Motion Systems
RR65
LIFE CALCULATIONS
Cr My Mx
Cd = Dynamic capacity (LC)
Cr = Radial capacity
Ca = Axial capacity
Mx, My, Mz = Moment capacities
Ca
Mz
Conversions
newton (N) x 0.2248 = lbs.
(lbf) meter x 0.0397 = inch
newton - meter (Nm) x 8.851 = in.-lbs.
• Rail is aluminum alloy with hardened and ground steel
raceways inserted.
• Custom solutions can be designed, engineered, and
manufactured to meet your specific requirements.
• Maximum lengths up to 5800mm are available.
• Patented preload adjustment
• Joinable for even longer runs.
• Cut-to-length
C d C r Ca Mx My Mz
PART NUMBER (N) (N) (N) (Nm) (Nm) (Nm)
RRS65 10200 5950 1678 19.0 58.2 154.7
M6 COUNTERBORE
MOUNTING HOLES 80.0
Customer specifies ”Y“ dimension
Y
65
RR65
ORDER INFORMATION
RR 65 – XXXX
CR
LENGTH
EXAMPLE: RR65-1200
Redi-Rail size 65 cut to 1200mm long
NOTE: Rail weight 1.14 Kg
REDI-RAIL
Nominal Size
30 = Dimension
45 = Dimension
65 = Dimension
Corrision Resistance
Rail type with 440 SST rods
Lengths (mm)
Note: Specify Rail Length & Carriage
The data and specifi cations in this publication have been carefully compiled and are believed to be accurate and correct. However, it is the responsibility of the user to
determine and ensure the suitability of Pacifi c Bearing® products for a specifi c application. Pacifi c Bearing’s only obligation will be to repair or replace without charge,
any defective components if returned promptly. No liability is assumed beyond such replacement. *Consult www.pacifi c-bearing.com for the latest technical updates.
800.962.8979 • www.pacific-bearing.com 143