LINEAR MOTION SYSTEMS

Redi-Rail ® Compact Precision Drawer Slides
RDQS57
Linear Motion Systems
RDQS57
All Redi-Rail Compact Precision rails guarantee maintenance
free operation, thanks to strong raceway wipers and
longitudinal seals for dust and impurity protection, and an
integrated lubed for-life greasing system, assuring a constant
thin layer of lubrification on the raceway surfaces.
All Redi-Rail Compact Precision rails are equipped with
internal end-stops, only designed to drag the intermediate
RDQS57-S C’sunk Version
element. It is therefore highly recommended not to use these
internal end of stroke travel limits as functional terminals;
strong external end-stops must be added. Similarly to the
RDR series, the RDQ’s stroke goes slightly beyond the overall
length of the rail in closed position. The rails come with an
overall black finish.
RDQS57-F Threaded Version
50.4
15
56.4
15
43 90° Ø6.5 M6
43 M6
36 36
6 6
NOTE: To be used when fi xing support (for fi xed slide) is with threaded holes
NOTE: To be used when fi xing support (for fi xed slide) is without
threaded holes
RDQS57
Fixed Slide
2/5 Stroke
3/5 Stroke
Length A
Moving Slider
The data and specifi cations in this publication have been carefully compiled and are believed to be accurate and correct. However, it is the responsibility of the user to
determine and ensure the suitability of Pacifi c Bearing® products for a specifi c application. Pacifi c Bearing’s only obligation will be to repair or replace without charge,
any defective components if returned promptly. No liability is assumed beyond such replacement. *Consult www.pacifi c-bearing.com for the latest technical updates.
160
800.962.8979 • www.pacific-bearing.com