LINEAR MOTION SYSTEMS

Redi-Rail ® Drawer Slides
Metric Series - Product Overview & Application
Linear Motion Systems
PRODUCT OVERVIEW & APPLICATION
PATENT PENDING
• Strokes range from 500mm to 1250mm
• S shape stainless steel frame ensures heavy duty telescoping
application
• Preloaded Redi-Rail assures precision movement
• Follow instructions on how to mount left-handed or righthanded
section
STROKE/2
LENGTH
STROKE/2
Drawer Slides - Metric
C
B
300 STAINLESS
Materials: Carbon steel rollers
SEALED BEARINGS
300 series stainless steel roller shafts
300 series stainless steel frame
Santoprene bumpers
AIRCRAFT ALUMINUM
Anodized aluminum rail
HARDENED SHAFTING
Stainless steel hardware
Working Temperatures: -20C to 120C (-4F to 248F)
• Oil impregnated wipers not only prevents the system from dust and particle intrusion,
but also provide lubrication and extend life cycles.
• Elastomer end stops are not intended as stroke terminus; hard stops must be provided
to limit the stroke
• Load rated for a pair of slides when the load is applied on the middle of drawer beams.
A load reduction factor shall be used if the load is applied toward the front of drawers.
H
W
MOUNTING DATA
LENGTH STROKE CAPACITY PER PAIR
A B C QTY.
SCREW SIZE
FOR
H W M .WEIGHT
PART NUMBER (mm) (mm) (N) (lbs.) (mm) (mm) (mm) MOUNTING (mm) (mm) (mm) (kg)
RRD30-0500 500 500 1,150 259 50 60 30 8 M5 79 21.1 35.3 2.2
RRD30-0750 750 750 1,391 313 40 60 50 12 M5 79 21.1 35.3 3.3
RRD30-1000 1000 1000 1,489 335 30 60 10 17 M5 79 21.1 35.3 4.4
RRD30-1250 1,250 1,250 1,542 347 30 60 20 21 M5 79 21.1 35.3 5.5
RRD45-0500 500 500 2,871 645 50 60 30 8 M6 109 28.4 52.1 4.0
RRD45-0750 750 750 3,673 826 40 60 50 12 M6 109 28.4 52.1 6.0
RRD45-1000 1000 1000 3,919 881 30 60 10 17 M6 109 28.4 52.1 8.0
RRD45-1250 1,250 1,250 4,061 913 30 60 20 21 M6 109 28.4 52.1 10.0
M
A
LOAD REDUCTION FACTOR
B
LOAD
LOAD REDUCTION FACTOR VS. LOAD POSITION
1.2
1
0.8
0.6
0.4
0.2
0 0 0.2 0.4 0.6 0.8 1
LOAD POSITION ON DRAWER BEAM
3D models can be downloaded from our
website at www.pacific-bearing.com.
NOTE: Load rated for a pair of slides when the load is applied on the middle of drawer beams. A load reduction factor shall be used if the load is applied toward the
front of drawers.
C
ORDER INFORMATION
RRD XX
_
XXXX
_
X
EXAMPLE: RRDXX-XXXX-X
REDI-RAIL DRAWER SLIDE
Size
30, 45
Lengths (mm)
0500, 0750, 1000, 1250
L = Left Hand
R = Right Hand
The data and specifi cations in this publication have been carefully compiled and are believed to be accurate and correct. However, it is the responsibility of the user to
determine and ensure the suitability of Pacifi c Bearing® products for a specifi c application. Pacifi c Bearing’s only obligation will be to repair or replace without charge,
any defective components if returned promptly. No liability is assumed beyond such replacement. *Consult www.pacifi c-bearing.com for the latest technical updates.
144
800.962.8979 • www.pacific-bearing.com