LINEAR MOTION SYSTEMS
LINEAR MOTION SYSTEMS
LINEAR MOTION SYSTEMS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Simplicity ® Plane Bearings<br />
Technical Information<br />
Linear Motion Systems<br />
INSTALLING SIMPLICITY ® BEARINGS<br />
STRAIGHT BORE HOUSING - SLIP FIT BEARING (cont.)<br />
3. Severe misalignment<br />
A standard O.D. bearing is recommended.<br />
EXAMPLE: FL24, FM30, FJ30<br />
Oversize the I.D. of the housing and install the bearing with<br />
o-rings. This will allow the bearing to “float” in the<br />
housing and match the misalignment or non-parallelism<br />
of the shafting.<br />
The recommended method of retention for this mounting is a<br />
snap ring at each end.<br />
NOTE: Do not use epoxy in this configuration. It will lock the<br />
bearing in place, not allowing it to self-align.<br />
See page 50 of the product catalog for more details on this<br />
solution.<br />
Technical Information<br />
MAX.<br />
ADDITIONAL<br />
CLEARANCE<br />
MAX.<br />
ADDITIONAL<br />
CLEARANCE<br />
MAX.<br />
ADDITIONAL<br />
CLEARANCE<br />
MAX.<br />
ADDITIONAL<br />
CLEARANCE<br />
MAX.<br />
ADDITIONAL<br />
CLEARANCE<br />
PART NO. (inches) PART NO.<br />
(mm) PART NO.<br />
(mm) PART NO.<br />
(mm) PART NO.<br />
(mm)<br />
FL03 0.0070 FM05<br />
FMT06<br />
FG06<br />
FJ06<br />
FL04<br />
FM08 FMT08 FG08 FJH08<br />
0.203<br />
0.203<br />
FL06 0.0080 FM10 FMT10 0.203 FG10 FJ08<br />
0.203<br />
FL08 FM12 FMT12 FG12 FJ10<br />
FL10<br />
FM16<br />
FMT14<br />
FG15<br />
FJ12<br />
0.0100<br />
0.254<br />
FL12 FM20 FMT16<br />
FG16<br />
FJ13<br />
0.254<br />
FL16<br />
FM25<br />
FMT20 0.254 FG18 FJ16<br />
0.254<br />
FL20 FM30 FMT25 FG20 FJ20<br />
0.0120<br />
0.305<br />
FL24 FM40 FMT30<br />
FG25<br />
FJ25<br />
FL32 FM50 FMT40 0.305 FG30 FJ30<br />
FL40<br />
FM60 0.406 FMT50 FG35 0.305 FJ35 0.305<br />
0.0160<br />
FL48 FM80 0.508 FG40 FJ38<br />
FL64 0.0200 FG50 FJ40<br />
FJ50<br />
FJ60<br />
0.406<br />
FJ80 0.508<br />
FJ100<br />
FJ120 0.610<br />
FJ150<br />
The data and specifi cations in this publication have been carefully compiled and are believed to be accurate and correct. However, it is the responsibility of the user to<br />
determine and ensure the suitability of Pacifi c Bearing® products for a specifi c application. Pacifi c Bearing’s only obligation will be to repair or replace without charge,<br />
any defective components if returned promptly. No liability is assumed beyond such replacement. *Consult www.pacifi c-braring.com for the latest technical updates.<br />
800.962.8979 • www.pacific-bearing.com 47
Change language