advanced drainage system - Polypipe
advanced drainage system - Polypipe
advanced drainage system - Polypipe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ridgidrain Installation 1.5<br />
Standard details to the manual of contract document for highway works<br />
Type S Surface water carrier drains<br />
Type T Surface water carrier drains<br />
X+600 max<br />
X+300 min<br />
X+600 max<br />
X+300 min<br />
300<br />
300<br />
50<br />
X<br />
50<br />
X<br />
X/6 or 100 min<br />
X/6 or 100 min<br />
Type Z Surface water carrier drains<br />
• Type S is the preferred granular bed<br />
and surround detail<br />
• Type Z is recommended where depths<br />
of cover are less than 1.2m. Joint filler<br />
board shall be placed in contact with<br />
the end of the socket at a pipe joint and<br />
shall extend through the full thickness of<br />
the concrete in contact with the pipe.<br />
These should be placed at each pipe joint.<br />
Class 8 material to S.H.W. Clause 503.3 (iv)<br />
Surround may be formed to a radius<br />
batter or to a horizontal surface<br />
Concrete to S.H.W. Clause 503.3 (iii)<br />
X+600 max<br />
X+300 min<br />
Granular material to S.H.W. Clause 503.3(i)<br />
Material to S.H.W. Clause 503.3(ii) e.g. sand<br />
18<br />
150<br />
X<br />
X/4 100 min<br />
In situ soil<br />
SHW = Specification for Highway Works<br />
All dimensions in mm<br />
X = pipe diameter