G61R Digital Surround Controller Installation Guide - Meridian

Settings
The following table summarises the product settings:
Option Values Description
The fan is: used as necessary, never used Specifies how the optional temperature controlled fan
operates.
Distance measurement: feet/inches, metres Units for displaying and entering distances.
Do your subs play to 20Hz? No, THX Ultra2/yes Subwoofer frequency response.
Boundary Gain Compensation: off, on Reduces the bass to compensate for listening positions close
Rear speaker separation 48"/1.2m
to a wall.
Separation between rear speakers; only available when there
are four surrounds.
Timeout to Home buttons: on, off Whether the soft keys revert to the home keys after a delay.
Diagnostic displays: on, off Whether diagnostic displays are shown.
Is the G61R IR Controller? Auto, Controller, Not Controller Whether the product is the infra-red controller for the system.
Main System Address 1-8 Advanced setting (normally 1).
Product Address 1-8 Advanced setting (normally 1).
To toggle the IR mode
• If necessary press On/Off to put the surround controller into
standby.
• Press More.
The display shows:
������� �� ������ �����
����
• Press IR to toggle between IR Auto (auto setup), IR Con.
(controller), and IR N.Con. (not controller).
After a short delay the surround controller will return to standby.
C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r