Nellcor OxiMax N595 Home Use Guide
Nellcor OxiMax N595 Home Use Guide
Nellcor OxiMax N595 Home Use Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Setting Up the N-595 Monitor<br />
WARNING: Do not connect the monitor to an electrical outlet<br />
controlled by a wall switch, because the monitor may be<br />
accidentally turned off.<br />
WARNING: To ensure accurate performance and prevent<br />
device failure, do not place the N-595 in extreme moisture<br />
environments, such as direct exposure to rain. Such exposure<br />
may cause inaccurate performance or device failure.<br />
WARNING: Inspect the N-595 monitor, sensor, cables, and<br />
connectors before each use. Do not use any equipment that<br />
appears damaged.<br />
WARNING: Do not lift the monitor by the oximetry cable or<br />
power cord because the cable or cord could disconnect from the<br />
monitor, causing the monitor to drop on the patient.<br />
WARNING: <strong>Use</strong> only the <strong>Nellcor</strong> pulse oximetry cable DOC-10<br />
with the N-595 monitor. <strong>Use</strong> of another pulse oximetry cable<br />
will have an adverse effect on performance. Do not attach any<br />
cable that is intended for computer use to the oximetry sensor<br />
port. Do not connect any device other than a <strong>Nellcor</strong>-approved<br />
sensor to the sensor connector.<br />
WARNING: The N-595 should not be used adjacent to or<br />
stacked with other equipment. If adjacent or stacked use is<br />
necessary, the N-595 should be observed to verify normal<br />
operation.<br />
20 N-595