Nellcor OxiMax N595 Home Use Guide

Oximetry Sensors
WARNING: Pulse oximetry readings and pulse signals can be
affected by certain environmental factors, oximetry sensor
application errors, and certain patient conditions. Refer to the
appropriate sections of this manual, including this chapter, for
specific information.
• Oximetry Sensors, page 23
• Sensor Performance Considerations, page 49
• EMI (Electromagnetic Interference), page 60
Caution: The sensor disconnect error message and associated
alarm indicate that the sensor is either disconnected or the
wiring is faulty. If this error occurs, you should immediately
check the sensor connection and, if necessary, replace the
sensor, the pulse oximetry cable (DOC-10), or both.
Contact your clinician before throwing away a used disposable
sensor as patient data is recorded by some sensor models.
The clinician will assist in the selection of a Nellcor sensor model
that is appropriate for the patient, based in part on patient weight
and activity level. Table 2 lists the available sensor models and
patient weight ranges for which each sensor is appropriate.
24 N-595