Nellcor OxiMax N595 Home Use Guide

Using the Monitor
Alarm Limit Changed Indicator
Alarm limits that have been changed from the factory default
settings are identified by a decimal point after the displayed reading
(%SPO2 or BPM). The changed parameter is also identified by a
decimal point on the alarm limits screen.
Sensor Messages
The N-595 monitor suggests possible solutions for sensor
placement when the monitor is unable to report the patient’s oxygen
saturation. The monitor will display sensor messages, based on the
type of sensor in use, that suggest actions to resolve the problem.
You can enable or disable the sensor messages feature. The default
for this feature is “enabled.”
Condition messages are followed by action messages. For example,
up to three condition messages may be displayed in priority order,
with the highest priority displayed on top.
Remove the condition display by pressing the EXIT softkey. Once
exited, the condition display will not return until a new condition
occurs.
40 N-595