Nellcor OxiMax N595 Home Use Guide
Nellcor OxiMax N595 Home Use Guide
Nellcor OxiMax N595 Home Use Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Setting Up the N-595 Monitor<br />
2. Plug the female connector end of the power cord into the N-595<br />
power connector on the rear of the monitor.<br />
Figure 8: Power Cord Connection<br />
WARNING: Do not plug the monitor into an electrical outlet<br />
controlled by a wall switch, because the monitor may be<br />
accidentally turned off.<br />
3. Plug the male connector of the power cord into a properly<br />
grounded AC outlet.<br />
4. Verify that the monitor’s AC POWER indicator is lit.<br />
Note: If the AC POWER indicator is not lit, do the following:<br />
• Ensure that the power cord is fully seated in the power connector<br />
on the rear of the monitor.<br />
• Ensure that the AC power outlet is functioning.<br />
• Check and confirm that the supply voltage selector switch is set<br />
for 115V.<br />
If the AC POWER indicator is still not lit, contact the clinician for<br />
further assistance.<br />
22 N-595
Change language