Lab 2.5.1: Basic PPP Configuration Lab

More documents

Recommendations

Info

CCNA Exploration Accessing the WAN: PPP Lab 2.5.1: Basic PPP Configuration Lab ! ! banner motd ^CUnauthorized access strictly prohibited and prosecuted to the full extent of the law^C ! line con 0 exec-timeout 0 0 password cisco logging synchronous login line aux 0 line vty 0 4 password cisco login ! end Task 10: Clean Up Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that are normally connected to other networks, such as the school LAN or the Internet, reconnect the appropriate cabling and restore the TCP/IP settings. All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 20 of 20
Lab 3.5.1: Basic Frame Relay Topology Diagram Addressing Table Device Interface IP Address Subnet Mask R1 R2 Default Gateway Fa0/0 192.168.10.1 255.255.255.0 N/A S0/0/1 10.1.1.1 255.255.255.252 N/A S0/0/1 10.1.1.2 255.255.255.252 N/A Lo 0 209.165.200.225 255.255.255.224 N/A S1 VLAN1 192.168.10.2 255.255.255.0 192.168.10.1 PC1 NIC 192.168.10.10 255.255.255.0 192.168.10.1 Learning Objectives Upon completion of this lab, you will be able to: • Cable a network according to the topology diagram. All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 24
Page 1 and 2: Lab 2.5.1: Basic PPP Configuration
Page 3 and 4: CCNA Exploration Accessing the WAN:
Page 19: CCNA Exploration Accessing the WAN:
Page 45 and 46: Lab 5.5.1: Basic Access Control Lis
Page 55 and 56: Lab 7.4.1: Basic DHCP and NAT Confi
Page 67: CCNA Exploration Accessing the WAN:

Lab 2.5.1: Basic PPP Configuration Lab

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?