0870 849 8057 USERS G 24, 30 - Ideal Heating

FLUE OUTLET
16
Notes.
1. It is recommended that a support bracket
is fitted for every 1 metre of extension pipe
used and a bracket should be used at every
joint, to ensure pipes are held at the correct
angle.
2. When extension ‘D’ packs are used the flue
duct MUST be inclined at 1.5 degrees to
the horizontal to allow condensate to drain
back into the boiler and out through the
condensate drain.
3. If the B pack, or telescopic B pack only are
used, they may be mounted horizontally.
The 1.5 degrees is taken care of by the
inclination of the flue within the air pipe.
4. Only use water as a lubricant during
assembly.
INsTaLLaTION
9 DETERMININg ThE FLUE LENgTh aND FLUE paCKs REqUIRED CONT’D
10 FLUE assEMBLy - Exploded View
An optional flue duct extension
kit is required for wall
thicknesses greater than :
side 378mm
Rear 420mm
LEgEND
1. Duct assembly.
2. Flue turret.
3. Turret clamp.
3
Telescopic B Pack shown
NON - TELEsCOpIC FLUE
Total Flue length dimension Flue
(measuring from CL of turret to outside wall)
Rear flue Side flue Extra packs Boiler
dim. x+155 dim. L+197 required size
Up to 640 mm Up to 640 mm none 24,30
Up to 1590 mm Up to 1590 mm Pack D - 1 off 24,30
Up to 2540 mm Up to 2540 mm Pack D - 2 off 24,30
Up to 3490 mm Up to 3490 mm Pack D - 3 off 24, 30
Up to 4440 mm Up to 4440 mm Pack D - 4 off 24, 30
Up to 5390 mm Up to 5390 mm Pack D - 5 off 24, 30
Up to 6340 mm Up to 6340 mm Pack D - 6 off 24, 30
Up to 7290 mm Up to 7290 mm Pack D - 7off 24 & 30
Up to 8240 mm Up to 8240 mm Pack D - 8 off 24 & 30*
Up to 9000 mm Up to 9000 mm Pack D - 9 off 24
* i-mini 30 is capable of 8m flue only
TELEsCOpIC FLUE
Total Flue length dimension Flue
(measuring from CL of turret to outside wall)
Rear flue Side flue Extra packs Boiler
dim. x+155 dim. L+197 required size
Up to 575 mm Up to 575 mm none 24,30
Up to 1525 mm Up to 1525 mm Pack D - 1 off 24,30
Up to 2475 mm Up to 2475 mm Pack D - 2 off 24,30
Up to 3425 mm Up to 3425 mm Pack D - 3 off 24, 30
Up to 4375 mm Up to 4375 mm Pack D - 4 off 24, 30
Up to 5325 mm Up to 5325 mm Pack D - 5 off 24, 30
Up to 6275 mm Up to 6275 mm Pack D - 6 off 24, 30
Up to 7225 mm Up to 7225 mm Pack D - 7off 24 & 30
Up to 8175 mm Up to 8175 mm Pack D - 8 off 24 & 30*
Up to 9000 mm Up to 9000 mm Pack D - 9 off 24
* i-mini 30 is capable of 8m flue only
2
3G9499a
1
TOP
The flue terminal MUST
be fitted with the ‘TOP’
uppermost to allow the
correct fit and use of
the plume management
system.
i-mini - Installation and Servicing