Operators Manual

More documents

Recommendations

Info

2. CLEANING THE WIRE When the black lines in the direction of paper feed are generated on the copy, clean the charger wire. BE SURE TO TURN OFF THE POWER before cleaning the charger wire. 1 1 Open 2 Clean Cleaning the charger wire the front cover. the charger. • Hold the cleaning knob, pull it out slowly and fully to the front and then push it back to the inside carefully and completely. Repeat this 2 or 3 times. Note Make sure that the charger knob is pushed in fully inside. 2 3 4 5 3 Close the front cover. 6 7 8 9 10 11 12 9-3
2. CLEANING THE WIRE (Cont.) 1 2 3 4 When any of the following is generated on the copy, clean the transfer charger wire. • White lines in the direction of paper feed. • Uneven tone or dim images. BE SURE TO TURN OFF THE POWER before cleaning the transfer charger wire. 1 Making 2 Clean Cleaning the transfer charger wire sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. the transfer charger wire using the attached charger cleaning accessory. 5 6 7 8 9 10 3 Close the side cover, automatic duplexing unit and stack feed bypass. 11 12 9-4 MAINTENANCE
Page 2 and 3:
Use of Recycled Paper in the Copier
Page 4 and 5:
1. TOSHIBA QUALITY IS SECOND TO NON
Page 6 and 7:
2. PREFACE Thank you for purchasing
Page 8 and 9:
3. TABLE OF CONTENTS 1. TOSHIBA QUA
Page 10 and 11:
6. STAPLING .......................
Page 12 and 13:
2. General Precautions 1Handle and
Page 14 and 15:
1. BEFORE MAKING COPIES 1 2 1. DESC
Page 16 and 17:
2. DESCRIPTION OF THE DIGITAL COPIE
Page 18 and 19:
Arrow Keys Use these keys to select
Page 20 and 21:
3. PAPER Acceptable Paper Types and
Page 22 and 23:
5 Push the left (lock) side to lock
Page 24 and 25:
Cassette Size Setting Enter the pap
Page 26 and 27:
4. DEPARTMENT CODES If the copier i
Page 28 and 29:
2. HOW TO MAKE COPIES 1 2 1. GENERA
Page 30 and 31:
2 Set the desired copy modes. • T
Page 32 and 33:
Placing the Original on the Glass 1
Page 34 and 35:
Precautions for Using the Automatic
Page 36 and 37:
3. BASIC MENU 1 2 1. PAPER SELECTIO
Page 38 and 39:
• For the e-STUDIO16, when an ori
Page 40 and 41:
Bypass Copying Bypass copying is co
Page 42 and 43:
Bypass Copying by Specifying the Co
Page 44 and 45:
2 Select 3 Press “AMS” by using
Page 46 and 47:
Zoom Up/Down 1 Select the paper cas
Page 48 and 49:
3. COPYING WITH COPY DENSITY SELECT
Page 50 and 51:
4. ORIGINAL IMAGE QUALITY SELECTION
Page 52 and 53:
4. EDIT MENU 1 2 1. DUPLEX COPYING
Page 54 and 55:
1-Sided Originals > 1-Sided Copies
Page 56 and 57:
How to place originals • When pla
Page 58 and 59:
9 Repeat 10 steps 5 to 8 until all
Page 60 and 61:
2-Sided Originals > 1-Sided Copies
Page 62 and 63:
9 Press 10 11 12 13 14 15 the key t
Page 64 and 65:
3. IMAGE SHIFT COPYING You can crea
Page 66 and 67:
5. 2-IN-1/4-IN-1 This function allo
Page 68 and 69:
1 Follow 2 Place When Placing the O
Page 70 and 71:
When Using the Automatic Document F
Page 72 and 73:
7. ANNOTATION This function allows
Page 74 and 75:
8. EDITING Mirror Image This functi
Page 76 and 77:
9. JOB BUILD This function allows u
Page 78 and 79:
11. JOB MEMORY You can store and re
Page 80 and 81:
12. PAPER TYPE You can select speci
Page 82 and 83:
5. PROGRAM MENU 1 2 1. WALKUP SCREE
Page 84 and 85:
2. TIMERS Auto Clear Auto Clear occ
Page 86 and 87:
Automatic Sleep If the copier remai
Page 88 and 89:
3. WEEKLY TIMER The weekly timer is
Page 90 and 91:
Canceling Weekly Timer 1 Press the
Page 92 and 93:
5. DEPARTMENT CODE Department Code
Page 94 and 95:
Clearing Department Code Counters Y
Page 96 and 97:
Change Department Code Setting The
Page 98 and 99:
Report Printing Print a copy count
Page 100 and 101:
6. COPY SETUP Specify the defaults
Page 102 and 103:
LIGHT/DARK 1 Press the key to enter
Page 104 and 105:
7. DATE AND TIME Dates and times ca
Page 106 and 107:
4 Enter 5 Select 6 Check the hour (
Page 108 and 109:
9. FUNCTION LIST This function issu
Page 110 and 111:
6. FINISHING MODE SELECTION 1 2 3 1
Page 112 and 113:
2. NON-SORT COPYING As sets of copi
Page 114 and 115:
1 If When Placing the Original on t
Page 116 and 117:
5. ALTERNATION In this copying mode
Page 118 and 119: 9 Press the key or the key. • The
Page 120 and 121: When Placing the Original on the Gl
Page 122 and 123: 7. WHEN THE GRAPHIC SYMBOL FLASHES
Page 124 and 125: 2. LOADING PAPER Adding Paper to th
Page 126 and 127: 3. REPLACING TONER CARTRIDGE When t
Page 128 and 129: Additional Explanation The life of
Page 130 and 131: 4 Open the front cover of the copie
Page 132 and 133: Replacing Ozone Filter The Ozone Fi
Page 134 and 135: 2 Rotate the blue knob on the side
Page 136 and 137: 9 Remove any misfed originals. Then
Page 138 and 139: Paper Misfeeds on the Bypass Guide
Page 140 and 141: 1 Making Paper Misfeeds in the Fuse
Page 142 and 143: 1 Making Paper Misfeeds in the Exit
Page 144 and 145: 1 By Paper Misfeed in the Finisher
Page 146 and 147: 6 Pull out the seal holding the sta
Page 148 and 149: 5 Peel off the tape from the case.
Page 150 and 151: Use this procedure to remove jammed
Page 152 and 153: 8. CALLING FOR SERVICE When the mes
Page 154 and 155: 8. USER TEST MODE 1 2 1. AUTOMATIC
Page 156 and 157: 2. INDIVIDUAL TEST MODE INDIVIDUAL
Page 158 and 159: 7 To continue the ADF test, press k
Page 160 and 161: 5. LED TEST The LED test checks LED
Page 162 and 163: 7. SPEAKER TEST The speaker test ch
Page 164 and 165: 9. TEST PRINT The test print checks
Page 166 and 167: 9. MAINTENANCE 1 2 1. DAILY INSPECT
Page 170 and 171: 3. SIMPLE TROUBLESHOOTING Check the
Page 172 and 173: Copy images are blurred Items to be
Page 174 and 175: 10. SPECIFICATIONS & OPTIONS 1. e-S
Page 176 and 177: 2. SPECIFICATION OF OPTIONS Automat
Page 178 and 179: Cassette Module Device (An option f
Page 180 and 181: Paper Feeding Controller (Control f
Page 182 and 183: Magazine Sort (Include Duplex) 2-in
show all

Operators Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?